Replacement 14 inch Roof Vent for Roof Vent with No Hinge

Question

Question:

Based on the picture can you tell what replacement trailer roof vent cover i should order? Also I dont see any attachment mechanism remaining on the vent. this had a lid and it blew off recently. The opening is roughly 14. I can send you additional pictures if needed. The trailer is a Rance Rough Rider 4 place snowmobile trailer. Thank you

asked by: Michael W

0

Expert Reply:

Since the mounting bracket for your roof vent broke off you'll need to use a MaxxAir UniMaxx Universal Replacement Lid, part # MA00-335002 for Smoke or # MA00-335001 for White. This uses a bracket that installs into the sides of your vent so it is compatible with virtually any 14" roof vent out there!

expert reply by: Jon G

0

click to enlarge

Answer 1

The Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX is meant to be a direct replacement however not all the necessary hardware is included. The remaining items you'll need is the Key Wall Control part #MA00A03550K,…

view full answer...

Answer 2

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 3

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 4

Hey Paul, we have a Blue Ox base plate kit that fits your 2024 Nissan Versa with the part #BX1856. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle.…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Karen, We offer a few different options with elongated bowls but they unfortunately don't come with the hand sprayer already installed. Luckily Dometic offers the #DOM75FR which you can install in just a few minutes. Before purchasing…

view full answer...

Answer 7

The Dexter Electric Trailer Brake Kit #23-105-106 are a replacement set for the 023-358-00. This kit includes a right and left brake assembly that is manually adjustable. I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit #23-458-459 as…

view full answer...

Answer 8

I would be happy to recommend the correct replacement dome for the roof vent in your 2016 Diamond Cargo Enclosed trailer, but you will need to confirm a few things first to determine the correct cover. First you will want to measure the opening in…

view full answer...

Answer 9

The simple answer is that you should not experience any impact. All of your appliances will continue to work fine. Both the Automatic Changeover RV LP Gas Regulator #37207-30395 you had and the Compact Low Pressure 2-Stage Automatic Changeover RV LP…

view full answer...

Answer 10

The Compact Low Pressure 2-Stage Automatic Changeover RV LP Gas Regulator part #37207-31525 is a universal regulator that will fit pretty much any trailer. It uses the standard 1/4" FIF inlet and 3/8" FPT outlet so there should be no…

view full answer...

Answer 11

A lot of propane regulators carry similar specs and are pretty comparable when it comes to quality. JR Products does a great job at pairing up good quality with a cost-effective product like the Compact Low Pressure 2-Stage Automatic Changeover RV LP…

view full answer...

Answer 12

You can replace your old vent cover with the MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent - Translucent Smoke Item #MA00-335002 or #MA00-335001 for white. These universal fit lids have a durable polypropylene construction…

view full answer...

Replacement 14 inch Roof Vent for Roof Vent with No Hinge

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching