Is Brake Output Circuit of Hopkins 7-Way RV Style Trailer Connector with Nite-Glow # HM48502 Active

Question

Question:

Will this work the tralier brakes?

asked by: David P

0

Expert Reply:

Yes, the Hopkins 7-Way RV Style Trailer Connector with Nite-Glow # HM48502 that you referenced can be used with the brake output circuit as that pin is active in the connector.

expert reply by: Jameson C

0

Answer 1

If you are looking for a 7-way tester that plugs into a vehicle's 7-way and allows you to test all of the functions what you'd want is the part #C73NR. The part #HM48502 isn't really a "tester" it does light…

view full answer...

Answer 2

I'd be happy to help you out with this! The 5-Way connectors are designed for smaller gauge wire that we see with light circuits as opposed to the larger wire used for 12V power. Because of this you'll need to install a 7-Way…

view full answer...

Answer 3

What you would want to do is splice in either new wires individually for the ones damaged on your 7-way wiring or splice in a jacketed 7-way bundle part #DW04914-1 which is sold by the foot. Or if you wanted to replace the 7-way at where the wiring…

view full answer...

Answer 4

The Hopkins 7-Way RV Style Trailer Connector with Nite-Glow - Trailer End #HM48502 will connect to your trailer wiring based on the function and pin locations of the attached photo. I've also attached an article to further assist with the trailer…

view full answer...

Answer 5

For a similar wiring harness that is made in the USA that has been confirmed to fit your 2006 Toyota Tacoma you would want the part #C55513.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...