Does Lippert Thin Shade Window Shade Fit Thin Shade Ready Doors

Question

Question:

We have a 2020 Keystone Outback 335CG. There is a sticker on the door window that says “Thin Shade Ready”. I want verification before I purchase. Thanks

asked by: Brian B

1

Helpful Expert Reply:

Yes, the Lippert Thin Shade Window Shade for Thin Shade Ready LCI Entry Doors # LC786037 will fit your trailer with the sticker that says "Thin Shade Ready," as that's exactly what this shade was designed for.

As you can see by the cut out of the instructions, this shade will fit right inside the frame, giving you an easy-to-use shade for privacy or to keep the hot sunlight out.

I have added a link to the instructions for you as well of the Lippert Thin Shade Window Shade # LC786037.

expert reply by: Kyle S

1

click to enlarge

Answer 1

I found some pictures online of your 2005 Lance camper door and it appears you have the standard RV door window dimensions which are 11-7/8" wide x 21-1/2" tall so yes the Lippert Thin Shade Window Shade #LC786037 would work.

view full answer...

Answer 2

Most likely you have a Lippert screen door as that is the most common brand of RV screen door out there. I attached a picture of a standard Lippert door for you to compare what you have to. You can also go over the door looking for any brand info…

view full answer...

Answer 3

We reached out to Lippert and they said that the Think Shade Complete Window Kit #LC806621 is designed to work with Lippert RV doors, but if you are retro-fitting it onto something different it can be installed on doors that are around…

view full answer...

Answer 4

The Lippert Thin Shade Window Shade #LC786037 is only designed to fit on RV doors with a Thin Shade ready window on them, but as long as you've got a door with that window on it it does not require any holes to be drilled. I've…

view full answer...

Answer 5

In regards to the Lippert Thin Shade Complete Window Kit part #LC806621, the shade is extended and retracted by pulling down or up on the lip at the bottom. Therefore, you don't have to mess with any drawstrings. If you have a screen door on…

view full answer...

Answer 6

Your two best options for a platform rack are the Swagman Dispatch 2 Bike rack, part #S44FR and the Swagman E-Spec 2 Bike Platform Rack, part #S94FR. Both of these racks are rated for RV use. They both also include integrated hitch and cable locks…

view full answer...

Answer 7

There should be no issue using the Swagman E-Spec Electric Bike Rack #S94FR with your Electra Townie that has a step-through frame. We haven't tested this specifically so I can't give you a guarantee but the frame of your Townie is not an…

view full answer...

Answer 8

Yes, all of the locks that come with the Swagman E-Spec 2 Bike Platform Rack #S94FR use the same key to lock and unlock so they are all keyed the same.

view full answer...

Answer 9

I have a solution for your, but there is not a way to change the arms on the Hollywood Racks TRS 2 #HR3500E. The TRS 2 does come with a cable lock integrated to provide the security you're seeking, but the locking arms are not the most common…

view full answer...

Answer 10

The max weight a 1-bike rack can carry is 60 lbs, so you'll have to get a 2-bike rack. There is an option that has the capacity you need, and will work with your 20 inch wheels and 3 inch wide tires. The rack is from Swagman, and is the following…

view full answer...

Answer 11

Yes, the Swagman Bike Cover for RVs part #S24FR is larger than the previous model. This cover measures approximately 67" tall x 84" wide (bottom) x 58" wide (top). It should work to cover most platform type bike racks with bikes.

view full answer...

Answer 12

I contacted Furrion on your behalf. With the credit card style remote for the Furrion RV Sound bar w/ USB Charge #FSB2N25MCBL, there is a small push lever at the bottom right. Using your thumbnail or small flathead screwdriver you can pop the remote…

view full answer...