Vent Replacement Cover for a 2003 Thor Tahoe Lite

Question

Question:

Looks like i need the ventline old rounded dome, but there are a few different styles and colors. Id prefer a smoke colored one versus the white ones I have. Also, theres one thats like $26 and another that looks the same for $58 in Blue/grey. Whats the difference? Overall, can you tell me the correct model i need in smoke color. Ill need 3 of them. Thanks

asked by: John

0

Expert Reply:

The Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke part # BV0554-03 is designed to fit the very common Ventadomes and post-1995 Elixir trailer roof vent. If you have one of these models this will be your replacement.

If you have another brand roof vent please let me know and I will give you the correct replacement. The manufacturer's name and model number should be on the vent.

The variance in price comes down to a great deal of factors through an algorithm but the main issue here is that the blue/grey is not nearly as common and therefore the price is higher.

expert reply by: Randy B

0

Answer 1

Thanks for the picture of your roof vent assembly! Based on that I can tell that the replacement vent lid you are looking for is the part #BV0554-03. I attached an install video for this for you to check out as well.

view full answer...

Answer 2

To replace the Ventline roof vent lid you have with the part #BV0554-03 does require removing the interior garnish of the vent so that you can drop the screen and disassemble the operator assembly like what is show in the attached install video.…

view full answer...

Answer 3

We offer two replacement covers for the Ventline AS-13-M-V101. We have a white cover #BV0554-01 and a smoked color #BV0554-03.

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 11

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 12

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Vent Replacement Cover for a 2003 Thor Tahoe Lite

Product Page this Question was Asked From

Continue Researching