Picking Out Replacement Step Module for Kwikee Series 42 Steps on 2006 Holiday Rambler

Question

Question:

is this a replacement mpdule for the series 42 steps on a 2006 holiday rambler navigator must have been built in 2005

asked by: Ronald I

0

Expert Reply:

If your Kwikee Series 42 powered steps were made before 2005 the replacement control module is the part # LC379146 whereas if they were made after that you'd need the part # LC379604. Since your Rambler is a 2006 model you most likely have a 2005 made module.

If you check out the module on your steps and compare it to the two product pictures for the modules I mentioned you should be able to easily identify what you have.

expert reply by: Jameson C

0

Answer 1

The harness difference you found is because the control unit you should have ordered looks to be the #LC379604 which fits the newer versions of the step. Most likely the steps of your RV were replaced with a kit made after 2005.

view full answer...

Answer 2

If your Kwikee Series 42 powered steps were made before 2005 the replacement control module is the part #LC379146 whereas if they were made after that you'd need the part #LC379604. If the steps were original equipment for your 1998 Country Coach…

view full answer...

Answer 3

In order to test the motor on what I assume are set of Lippert Kwikee Electric Steps, you will first want to sever the yellow and red wires on the motor. Once you do this you will then need to obtain access to a 12 volt power source you know…

view full answer...

Answer 4

If you are currently using 909510001 then you will need #LC379605. The other one, #LC379146, is for pre-IMGL steps. IMGL stands for integrated motor/gear box/linkage. In October of 2004, Kwikee began shipping steps with an integrated motor/gear…

view full answer...

Answer 5

Since you have a yellow Kwikee module with 909513 on it the correct replacement is the part #LC379606.

view full answer...

Answer 6

The correct control unit for your 28 Series Kwikee steps is part #LC379146 on our site. This is the same control unit that is included in the Kwikee Steps Replacement Kit #LC379769 for 28, 31, 37, and 39 series steps.

view full answer...

Answer 7

I am not totally sure why but Lippert has two different types of magnetic door switches that work opposite of each other. One switch setup completes a circuit when they are connected magnetically and the other setup opens a circuit when they are…

view full answer...

Answer 8

It sounds like you know exactly what you need. I can confirm you are correct the Replacement Control Unit for Kwikee Electric RV Steps item #LC379146 is the correct part for the Kwikee Series 42 powered steps that were made before 2005.

view full answer...

Answer 9

The Kwikee Control Box #909506000 has been discontinued by the manufacturer. Unfortunately, if your steps were manufactured prior to February of 1999, then there are not replacement parts available and you'd need to replace the entire step. If it…

view full answer...

Answer 10

According to Lipperts website you will want to replace your Series 42 step motor with the Replacement Motor for Kwikee 25 Series Electric RV Steps - 12V item #LC369506. You will need a IGML control box like the Replacement Control Unit for Kwikee…

view full answer...

Answer 11

Thank you so much for attaching a picture of your steps! It definitely helped me identify the part you need. I confirmed with my technician at Lippert (the makers of Kwikee steps) that the part you need is the Replacement Rectangle Door Sensor for…

view full answer...

Answer 12

The Replacement Control Unit for Kwikee Electric RV Steps #LC379146 is the controller you need for your Kwikee steps on your 2005 Gulfstream Independence Super C motorhome with the 32 series steps. This controller is the Kwikee part number 909510000…

view full answer...