Recommended Trailer Hitch for 1992 Jeep Wrangler YJ

Question

Question:

I've got a 1992 Jeep Wrangler YJ and my old hitch has seen better days. What do you recommend to replace it? Need something with a 2" receiver. Thanks in advance

asked by: Randy

0

Expert Reply:

I know exactly what you need! I recommend using the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" which has a durable matte black powder coating that will hide nicks, dirt and blemishes much better than the glossy black finish that some other hitches have. This hitch has a 2" receiver and will mount to the rear of your YJ without any drilling required.

If you need to also replace your trailer wiring harness on your 1992 YJ, I recommend using the Tekonsha # 118356 which will tee into the plugs behind your tail lights and provide you with a 4 way connector to power the lights on a trailer.

I've linked some installation videos of the wiring harness and a similar hitch that will install in the same manner for you to refer back to if you're going to be installing these yourself.

expert reply by: Erik B

0

click to enlarge

Answer 1

I have some great upgraded wheel options for a Rockwood Geo Pro. In regards to fit, you'll need to verify the bolt pattern of the hubs which is likely 5 on 4-1/2" and then you'll need to be sure there is space for the new tires…

view full answer...

Answer 2

I spoke with my contact at Curt, who tells me that you can simply disconnect the existing exhaust hanger, install the hitch, and then use the bolt shown in the diagram I have provided to reinstall the bracket. The bolt would pass through the exhaust…

view full answer...

Answer 3

It sounds like you have the Kuat Transfer V1. If that is the case, the weight capacity is actually 40lbs. instead of 45lbs. This would not be adequate for using your 50lb. e-bike. You would need to upgrade to the Kuat Transfer V2 Bike Rack #KU64FR,…

view full answer...

Answer 4

It looks like you are using a sleeve adapter like the Curt Hitch Receiver Reducer Sleeve - 2-1/2" to 2" #C45405 In order to lock the Thule T2 Pro XTR Bike Rack #TH83JV, I recommend using an extended hitch adapter like Brophy Hitch Reducer…

view full answer...

Answer 5

None of our manufacturers list a fit for the 1985 Jeep CJ-8 Scrambler, but I can provide you a photo showing the bolt hole spacing for the Curt #13412 hitch for the 1985 CJ-5. You can compare those dimensions with the holes in the rear crossmember to…

view full answer...

Answer 6

For your 2020 Forest River Geo Pro I recommend using the Adjustable Width Trailer Hitch Receiver #13703, this will fit most trailer frames; spanning from 22" to 72". This hitch will use the bolt holes on the frame of your trailer to mount,…

view full answer...

Answer 7

For your 2018 Grand Design Reflection 28BH is 33 feet 10 inches long, the best storage cover for a warm climate is from Adco: - Adco SFS AquaShed RV Cover for 5th Wheel Toy Hauler - Up to 34' Long #290-52255 This cover is ideal for areas where…

view full answer...

Answer 8

Both part numbers you referenced are confirmed catalytic converters for your 2003 Toyota Corolla. The difference is that the part #MF49461 is a higher grade converter. It is part of the OEM Grade line of converters from Magnaflow. OEM Grade…

view full answer...

Answer 9

I'm sorry to hear about the trouble that you have with the installation! From the looks of the picture, it looks like the bracket of the #e98859 does not completely line up with the hold on your frame. To fix this issue, one of the best solutions…

view full answer...

Recommended Trailer Hitch for 1992 Jeep Wrangler YJ

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching