Tallest Gooseneck Hitch Ball for 2020 Ford F-350 with OEM Gooseneck Hitch Rail Kit

Question

Question:

I am looking for a high rise in for the factory install goosneck. Is this the tallest that is compatible? I am looking to get a little more clearance on bedrails without doing too much or going with a drastic measure.

asked by: Traci

0

Expert Reply:

The tallest gooseneck ball we offer for the Ford OEM fifth wheel rail kits is the B and W Ball Kit # BWGNXA2061. From the base of the ball to the very top measures 5-3/4 inches. This is about 1/2 inch taller than most of the other fits available.

expert reply by: Jameson C

0

click to enlarge

Answer 1

First thing to try is soaking the hitch ball in as much WD-40 that you can so that you can hopefully free it up. Let it sit overnight and maybe hit it with a rubber mallet as well. The next thing you can try is putting the weight of a gooseneck…

view full answer...

Answer 2

I went out to the warehouse and found that the height of the hitch ball in the B&W Ball and Safety Chain Kit #BWGNXA2061 for your 2018 GMC Sierra 3500 measured 5-3/4" from the bottom of the platform to the top of the hitch ball. I have…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

I recommend using the B&W Ball and Safety Chain Kit #BWGNXA2061 for the factory puck system on your 2020 Ford F-350 Super Duty. I like this kit of the Curt #C60692 and Reese #RP30137 options because it uses a handle to secure the gooseneck hitch…

view full answer...

Answer 11

The two parts you mentioned (#RP87FR and #RP39FR) that fit your 2021 Ford F-350 Super Duty will both allow the ability to pull a gooseneck trailer with a gooseneck ball or use a 5th wheel hitch in the puck system. The only difference between them is…

view full answer...

Answer 12

Between the Curt #C60692 and B&W #BWGNXA2061 that will fit your 2022 GMC Sierra 3500 with the factory pucks/prep package, I do prefer the B&W. Though both the Curt and B&W are rated up to 30,000 pounds and will fit your truck perfectly,…

view full answer...