Are Longer Shackle Straps Needed with Lippert Road Armor Equalizer  

Since your axles are only 3,000LB capacity I recommend the Equa-Flex Cushioned Equalizers #LC279687 as they are rated for 3,000-6,000lb axles. And as you said the dimensions better match your current equalizers. The Road Armor Shock Absorbing…

I would be happy to help! To determine if either the Equa-Flex Cushioned Equalizers #LC279687 or MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR will fit your 2019 Heartland Pioneer 250 RL you will need to measure the length of your…

In regards to the Road Armor Shock Absorbing Equalizer Kits like part #LC696740, the only difference between the blue powder coated option and yellow powder coated option is that yellow denotes aftermarket and blue denotes factory. In other words, if…

Yep, you'll need to go with longer shackle straps for the taller Road Armor Shock Absorbing Equalizer Kit #LC696740. For 3-1/8" straps use the Lippert AP Kit - Tandem Axle Road Armor Wet Bolts and Shackles #LC52SV.

I have a solution for you but we do not have a 2" square u bolt kit for a 3,500 lbs square axle that is 5 3/4" long. You will need to buy the u bolts and u bolt plates separately. The Square Trailer U-Bolt item #SP01-160 comes in a 2 pack,…

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…

To determine the correct length shackle straps it is best to compare your current equalizer to the Road Armor Shock Absorbing Equalizer #LC696740 that you installed on your 2021 Keystone Cougar 22MLS. A basic Equalizer #AP233 that comes on your size…

The problem seems to be mostly that your shackle straps are hitting the frame, and the reason for this is almost certainly because the 3-1/8" Shackle Strap #TRSL313 you are using are too long. The other possibility was the hangers being too…

Thanks for all that info and we can get you exactly what you are needing. Since you have a 2-3/8" axle that would be a 3,500 lb axle, so you want leaf springs rated for that weight. The concern with springs that exceed the rating of your axle is…

Thank you for all that info, and replacing the equalizers, as well as upgrading the suspension hardware is going to be the best option for you. The correct size equalizer, as well as the suspension kit that I recommend is the following: - Curved…

The only way to know for sure if the 1/4 inch longer shackle straps, #TRSL225 (compared to the 2 inch long #TRSL200) will be a problem is to install them. The longer straps will likely mean they will be at a steeper angle once installed and that…

I did some looking and found that the 46210 and 46845 hubs you currently have use the same #L68149 inner bearing and #L44649 outer bearing. However, as we do not carry the Tie Down Engineering Vortex hubs, I cannot say what all will fit them,…