Overall Length of Buyers Products Straight Tongue Trailer Coupler # 3370091562

Question

Question:

What is the overall length of this?

asked by: Scott B

1

Helpful Expert Reply:

The overall length of the Buyers Products Straight Tongue Trailer Coupler # 3370091562 that you referenced is 17-1/4 inches.

expert reply by: Jameson C

1

click to enlarge

Answer 1

The Buyers Products 2-5/16" Heavy-Duty Channel Tongue Coupler #3370091562 is designed to fit a 3 inch frame channel like you mentioned. That means that the inside diameter of the coupler where it would mount to a trailer measures 3 inches…

view full answer...

Answer 2

I went out to our warehouse to take a look at the Buyers Products Straight Tongue Trailer Coupler #3370091562 you referenced and I measured a distance of right at 7/8" from the inside top of the coupler down to the center of the mounting holes.…

view full answer...

Answer 3

Using a low-profile coupler like the Buyers Products #3370091562 that you referenced is a great solution to provide the clearance needed for your Ram's tailgate. As you mentioned in your question this coupler features a unique spring-loaded latch…

view full answer...

Answer 4

The Titan Extended 2-5/16 inch Bolt On Coupler, #T4853100, is rated for 21,000 pounds capacity. To be able to tow that much weight, all components would need to be rated for at least 21,000 pounds including the tow vehicle, the hitch, the ball, all…

view full answer...

Answer 5

I did confirm with Titan that with this high of a capacity of coupler, the Titan Zinc-Plated Straight-Tongue Coupler #T4853100 will definitely require the use of all 5 bolts. They see commonly where holes are drilled to allow for all 5 bolts to be…

view full answer...

Answer 6

The Titan Zinc-plated trailer coupler #T4853100 is designed to be mounted using all five bolt holes, and I would strongly recommend doing so. There is not really a way to know what the weight capacity would be, depending on the number and placement…

view full answer...

Answer 7

To install the Fulton Fold-Away Coupler Hinge Kit for 3" x 5" Tongue #FHDPB350101 you will simply need to cut your current trailer tongue so that you have the desired length that is foldable (see attached customer photo). Because of this we…

view full answer...

Answer 8

You should have the hitch ball height set so that the trailer tows as level as possible behind your pickup. If there is a setting that goes between slightly higher than level and slightly lower than level, opt for the slightly lower setting, when the…

view full answer...

Answer 9

You are correct, if you were to extend the length of your trailer tongue it would not lower the capacity of the tongue weight of your hitch. If anything the hitch has more leverage over the tongue weight now like you mentioned so the opposite would…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Overall Length of Buyers Products Straight Tongue Trailer Coupler # 3370091562

Product Page this Question was Asked From

Continue Researching