What is the Capacity of the Titan Extended 2-5/16 inch Bolt On Coupler, # T4853100

Question

Question:

21,000 or 2,100?

asked by: Rusten

0

Expert Reply:

The Titan Extended 2-5/16 inch Bolt On Coupler, # T4853100, is rated for 21,000 pounds capacity. To be able to tow that much weight, all components would need to be rated for at least 21,000 pounds including the tow vehicle, the hitch, the ball, all the hardware, and the trailer.

expert reply by: Michael H

0

Answer 1

I did confirm with Titan that with this high of a capacity of coupler, the Titan Zinc-Plated Straight-Tongue Coupler #T4853100 will definitely require the use of all 5 bolts. They see commonly where holes are drilled to allow for all 5 bolts to be…

view full answer...

Answer 2

The Titan Zinc-plated trailer coupler #T4853100 is designed to be mounted using all five bolt holes, and I would strongly recommend doing so. There is not really a way to know what the weight capacity would be, depending on the number and placement…

view full answer...

Answer 3

The Titan Straight-Tongue Coupler, part #T4853100, is designed for a 2-5/16 inch ball and a 3 inch wide trailer tongue. It has a weight capacity of 21,000 lbs. I spoke with my contact at Titan and he said that the coupler was tested with all five…

view full answer...

Answer 4

The overall length of the Buyers Products Straight Tongue Trailer Coupler #3370091562 that you referenced is 17-1/4 inches.

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 9

I can end this debate for you real fast! Trailer tires, which will have an ST in front of the size, should always be inflated to the maximum psi indicated on the tire. Trailer tires usually do not have a recommended and maximum psi indication so I am…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…

view full answer...

Answer 12

There's not many differences between the Air Lift WirelessONE item #AL25980EZ and item #AL25980. The main difference is that the item #AL25980EZ has a slightly higher CFM at 1.03 compared to 0.92 and it runs slightly more efficient at 9% over 15%…

view full answer...