Recommended Plug for B&W Turnoverball Underbed Gooseneck Hitch

Question

Question:

Does this part fit the BandW turnoverball hitch plug? Do you have a part number for the hitch plug?

asked by: Scott

0

Expert Reply:

I have two cover options for a B&W Turnoverball Underbed Gooseneck Hitch, the B&W Rubber Cover for Stowed Turnoverball part # BWGNXA1710 and the B&W Rubber Cover for Empty Turnoverball Socket part # BWGNXA1715. The former option installs in the bottom of the hitch ball (while stowed) and the latter installs directly into the square receiver tube opening.

expert reply by: Conner L

0

Answer 1

If you plan to leave you chassis exposed and not put a bed on your 2011 Freightliner M2 cab and chassis the Buyers Products 42" x 13-1/2" Gooseneck Hitch Plate #3373014981 is going to be your best option. This is recommended to be…

view full answer...

Answer 2

You will want the hitch to be set at the height that 1) allows the trailer to be level, and 2) allows you a minimum of 6 inches between the bottom of the trailer loft and the top of the bed rails. The fifth wheel hitches offer several inches of up…

view full answer...

Answer 3

What gooseneck hitch do you have installed in the bed of your truck? That will dictate what the correct plug would be.

view full answer...

Answer 4

The primary difference between the B&W Companion #BWRVK3500 and the BWRVK3300 referenced in your question is how they will actually mount to the truck bed. The B&W Companion 5th Wheel Trailer Hitch #BWRVK3500 is a fantastic hitch that will…

view full answer...

Answer 5

I attached a chart that has all of the arm positions explained for the B and W Companion Hitch part #BWRVK3500 that you have. The horizontal position really comes down to cab clearance. Most people are find with the arms located forward which allows…

view full answer...

Answer 6

In order to use the B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter part #BWRVK3500 or part #BWRVK3400 on a 2020 Chevrolet Silverado 3500 you have a few options depending on if the truck has the factory prep package. The factory prep…

view full answer...

Answer 7

The pivot arms on your B&W Companion 5th Wheel Hitch #BWRVK3500 can definitely be adjusted to hopefully give you the needed clearance for your tailgate with the trailer hooked up. If the arms on your hitch are currently in the forward most…

view full answer...

Answer 8

The foot pads for the B&W Companion 5th Wheel Hitch #BWRVK3500 should definitely be used to ensure proper contact with the truck bed to provide the necessary support and stability. I do not recommend leaving them off the hitch. If you are having…

view full answer...

Answer 9

The reason why the manufacturer requires removal or trimming of a drop-in bed liner or mat is because the B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter #BWRVK3500 needs to make full metal contact with the truck bed. This will create…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Recommended Plug for B&W Turnoverball Underbed Gooseneck Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching