Stealth Hitch Recommendation For 2017 Porsche Macan GTS

Question

Question:

I have 2017 Macan GTS. Will it fit? or its only for standard Macan?

asked by: Masa

0

Expert Reply:

I do have an option for you but the Stealth Hitches Hidden Rack Receiver part # SH84FR does not fit the 2017 Porsche Macan GTS only the standard.

For the 2017 Porsche Macan GTS the Stealth Hitches Hidden Rack Receiver part # SH24FR is what you need. The Stealth hitch is a great choice because it is completely invisible once installed and not in use. While in the use the receiver tube locks to the steel block behind the bumper and latches into place. When the hitch is not being used simply unlatch the receiver tube, remove it and store it in the trunk or cargo area. Please keep in mind this particular stealth hitch is only designed for accessories such as bike racks. If you needed to tow you will need the Stealth Hitch with the tow package part # SH24FRT.

expert reply by: Heather A

0

Answer 1

The Stealth Hitches Hidden Rack Receiver that I recommend for a 2017 Porsche Macan is going to be dependent on what you will be using the trailer hitch for. If you are using the trailer hitch for just a bike rack or cargo carrier then part #SH84FR…

view full answer...

Answer 2

To trim the optional stainless steel fascia on your 2016 Porsche Macan to install the Draw-Tite Trailer Hitch Receiver #75940 or Stealth Hitches #SH84FR you may still be able to use a Dremel as shown in the instruction manual, but you may need to use…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Stealth Hitch Recommendation For 2017 Porsche Macan GTS

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching