How To Replace Wheel Studs
Question:
I have a trailer with this hub. I need to replace the wheel studs. Do I need to remove the hub to find out which studs?
asked by: Scott W
Expert Reply:
I am happy to help you replace the wheels studs but it will require some measuring with digital calipers like part # PTW80157. I have attached a diagram with the measurements needed to get the correct replacement. Once you can provide me with the A, B, C, D, E, and F measurements I would be able to make sure you get the correct replacement. For example the Kodiak Wheel Bolt part # K12WB2 measure 1/2" in diameter and 2" long. You would need to remove the hub and drive the studs out.
Products Referenced in This Question
Kodiak Wheel Bolt - 1/2" Diameter x 2" Long
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 2 Inch Long
- Kodiak
more information >
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Continue Researching
- Shop: B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks - 30,000 lbs
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12-1/4" - Left/Right Hand Assemblies - 10K
- Shop: 2-5/16" Hitch Ball - 2" Diameter x 3-1/2" Long Shank - Raw - 30,000 lbs
- Shop: Dexter Trailer Brake Drum for 9,000-lb to 10,000-lb Axles - 12-1/4" - 8 on 6-1/2 - Non-ABS
- Shop: Replacement Hitch Ball for B&W Turnoverball Underbed Gooseneck Hitches - 2-5/16"
- Shop: Kodiak Wheel Bolt - 1/2" Diameter x 2" Long
- Shop: Replacement Shoe and Lining for Dexter 12-1/4" x 4" Electric Brake Assembly LH - 10K
- Q&A: Replacement Brake Assemblies for Trailer with Dexter 10k Axles
- Search Results: brake shoe lining
- Search Results: weld in hitch
- Search Results: pads
- Search Results: mobile home axle
- Q&A: How to Wire a 2000 Chevy Silverado for Hauling a Trailer with a Brake Controller
- Q&A: What Trailer Wiring Harness Should be Used on a 2000 Chevy Silverado and How to Install It
- Search Results: gnrm1108
- Shop: Trailer Wiring
- Shop: Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Hitch
- Video: Choosing the Right Brake Controller
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Search Results: 68149
- Video: Choosing the Right Trailer Wiring
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector