Will UWS Crossover Type Toolbox UWS00373 Leave Room in Truck Bed for Towing 5th Wheel
Question:
Will this work on a Ram 3500 with 8ft bed pulling a fifth wheel. I am worried about the trailer hitting the tool box
asked by: Shawn
Helpful Expert Reply:
It's not possible to say for sure, but I can give you a good idea of where the bed will sit in the box. The top of the lid of the UWS # UWS00373 toolbox will sit about 2 inches above the top of the bed side so it's possible that if you are making a turn at the bottom of a slope that the front underside of the trailer loft could hit the top of the toolbox. Generally speaking, we like to see at least 4 inches of height clearance between the top of the bed side (or the closest object) and the underside of the trailer loft. The tool box will extend about 18-1/8 into the bed aft of the front bulkhead of the bed.
You could use some scrap cardboard to mock up a toolbox, and arrange it in the bed so its height sits 2 inches above the bed rail and 1/-1/8 inches rearward of the front of the bed, then try several different low speed maneuvers to see how close the trailer loft gets.
If you find that the trailer comes too close for comfort, a chest style toolbox would be a better choice (see link)
Product Page this Question was Asked From
UWS Truck Bed Toolbox - Crossover Style - Low Profile Series - 8.6 cu ft - Gloss Black
- Truck Tool Box
- Crossover Tool Box
- Lid Style - Low Profile
- 13-1/2 Inch Tall
- Aluminum
- Medium Capacity
- 19 Inch Wide
- 72 Inch Long
- Black
- UWS
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Tool Box
- Shop: Tonneau Cover
- Shop: Access Toolbox Edition Soft, Roll-Up Tonneau Cover
- Shop: Access Toolbox Edition Soft, Roll-Up Tonneau Cover
- Shop: UWS Truck Bed Toolbox - Crossover Style - Low Profile Series - 8.6 cu ft - Gloss Black
- Shop: UWS Truck Bed Toolbox w/ Pull Handles - Crossover Style - Low Profile - 8.6 cu ft - Matte Black
- Q&A: Toolbox that Has Accessible Handles for 2022 Ford F-350 with Access Tonneau Cover for Tool Boxes
- Q&A: Tool Box and Tonneau Cover Combination that Fits 2022 Ford F-350 Long Bed
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: BAK Revolver X4s Hard Tonneau Cover Review
- Search Results: 44649
- Q&A: Replacement for Demco Master Cylinder 05680-C for Drum Brakes
- Search Results: 68149
- Video: Choosing the Best Fifth Wheel Hitch
- Shop: Trailer Wiring
- Q&A: Parts Needed to Install Brake Controller on 2012 Chrysler Town and Country
- Article: How to Choose the Right Trailer Hitch Class
- Shop: B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Shop: Fifth Wheel Hitch
- Article: How to Measure for Trailer Hitch Drop
- Search Results: dust cap
- Shop: Suspension Enhancement
- Video: BAKFlip MX4 Hard Tonneau Cover Review
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Search Results: 25580
- Article: Stability Control for Heavy Duty Vehicles
- Search Results: led turn signal