Curt Front Mount Hitch for 2019 Ram 1500 Tradesman without Factory Hooks

Question

Question:

Just to confirm. This hitch will mount on the 2019 Ram 1500 tradesman without factory hooks

asked by: Mike E

0

Expert Reply:

Yes, the Curt Front Mount Trailer Hitch # C87FR that you referenced is confirmed to fit and will work perfectly on your 2019 Ram 1500 Tradesman Short Bed without the factory tow hooks. This is a custom hitch that's designed to line up to existing holes in your truck's frame to allow for a simple no-drill installation. It features a 500 pound vertical load limit and a 9,000 pound line pull capacity.

I have attached the written installation instructions that you can check out as well.

expert reply by: Chris R

0

Answer 1

The Curt Front Mount Trailer Hitch Receiver part #C87FR which is a fit for a 2019 Ram 1500 will work on models with the active air damn behind the fixed splitter. This can actually be seen in a photo from the instructions which I attached below,…

view full answer...

Answer 2

The tow hooks of your 2020 Ram 1500 do need to be permanently removed to install the Curt hitch #C87FR that you referenced. There isn't a similar hitch that would allow the tow hooks to remain.

view full answer...

Answer 3

The weight on the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" part #C87FR is just under 50 Lbs. This is also confirmed to fit your 202 Ram 1500.

view full answer...

Answer 4

Yes! I can definitely provide you with a photo of how the Curt Front Hitch #C87FR looks when installed on a compatible Ram model. Please see the attached picture for your convenience. The truck in the picture is a 2020 model. The great thing about…

view full answer...

Answer 5

It's possible the noises you describe hearing from your RV's Converter/Charger when plugged into electricity are normal. If you listen closely you will also hear a humming sound which is also normal. The clicking and pinging sounds you are…

view full answer...

Answer 6

Yes, the bumper and front fascia of your 2018 GMC Sierra 1500 does need to remove to install the Demco Base Plate kit part #DM9519330. Then to use this base plate kit with your Blue Ox tow bar you'd just need the part #DM9523127 and you'd be…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Curt Front Mount Hitch for 2019 Ram 1500 Tradesman without Factory Hooks

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching