B&W Extend a Goose Coupler Mounting Options
Question:
This appears to be the perfect solution to allow me to change from a standard bed to short bed truck and keep using an existing horse trailer. However, my trailer does not have a gooseneck pin, but rather two locking bolts and jam nuts. Although this coupler would fit, is it advisable since a fair degree of torque must be applied to the coupling in use and the positive anti-twist resistance provided by the pin would be absent.
asked by: Bill L
Expert Reply:
This will be a great solution for you. You will still want to use caution the first few times to get a really good feel for the turning radius that you will have and not exceed that point so you don't have any issues with contact between truck and trailer.
Here is whats said in the instructions:
"The coupler must only be used with a hitch equipped with a 2-5/16" ball measuring between 2.283" to 2.313", and a trailer equipped with a conventional 4" inside diameter round sleeve. The sleeve must either have two set bolts, or have at least one set bolt and a safety through pin. Failure to use the proper towing equipment may result in serious injury or death."
I have linked a video I did on this below to check out.
Product Page this Question was Asked From
B&W Extend-A-Goose Gooseneck Coupler - 2-5/16" Ball - 10" Offset - 24,000 lbs
- Gooseneck Coupler
- Coupler with Inner Tube Only
- Round Tube
- 6000 lbs TW
- 24000 lbs GTW
- 2-5/16 Inch Gooseneck Ball
- Manual Latch
- B and W
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Video: PackEm Stake Pocket Tie-Down Anchors Review
- Search Results: offset gooseneck coupler
- Search Results: tie~down
- Shop: B&W Extend-A-Goose Gooseneck Coupler - 2-5/16" Ball - 10" Offset - 24,000 lbs
- Shop: Bulldog Winch 17-Piece Deluxe Ratcheting Vehicle Tie-Down Strap Set - 3,335 lbs
- Shop: Stake Pocket Tie-Down Anchors - Black Powder Coat - 2-3/4" D-Ring - 4,000 lbs - Qty 2
- Shop: Bulldog Winch Combo Ratcheting Tie-Down Strap - 2" Wide x 10' Long - 3,335 lbs
- Q&A: How To Gain more Clearance With Gooseneck Trailer Hooked To Ford With Factory Prep Package
- Q&A: Max Distance Behind Gooseneck Ball for Trailer Turning Clearance
- Q&A: Will Extend-A-Goose Gooseneck Coupler Work In Recessed Opening In Truck Bed
- Q&A: What Are the Dimensions of the Gen-Y Pegasus Shocke Absorbing Gooseneck Coupler
- Q&A: Will the B&W Extend-A-Goose Gooseneck Coupler Change Tongue Weight
- Video: B and W Extend-A-Goose Gooseneck Coupler Review
- Q&A: Center Of Curt Gooseneck Hitch C60633 To Front Of Bed On 2020 Ram 2500 W/ 6-1/2' Bed
- Video: Review of Gen-Y Hitch Trailer Hitch Ball - Gooseneck Trailer Hitch Dodge OEM 5 Inch Offset - GY83XR
- Q&A: What Hitches Does the Curt 4 inch Offset Ball part # C602 Fit
- Shop: Curt 4" Offset Ball for Double-Lock Gooseneck Hitch
- Shop: Gen-Y Hitch Gooseneck Trailer Hitch for Dodge Ram OEM Puck Systems - 5" Offset - 25,000 lbs
- Shop: Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch - 35,000 lbs
- Shop: Trailer Hitch
- Shop: Gooseneck Hitch
- Search Results: bulldog gooseneck hitch
- Shop: Trailer Wiring
- Search Results: gooseneck hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Trailer Wiring
- Search Results: trailer hitch
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Brake Controller