Is There Tow Bar Option for 2019 Ford Ranger That Connects Directly to Tow Hooks

Question

Question:

I have a roadmaster tow bar and currently tow a wrangler. I am thinking about getting a 2019 ford ranger 4x4 as a toad. Is there an adapter that I can attach to the Ranger’s front tow hooks that will accept the tow bar? Thanks.

asked by: George K

1

Helpful Expert Reply:

The only connection points we offer for flat towing a 2019 Ranger would involve installing base plate assemblies that install where the tow/tie down hooks currently sit. Some Jeep Wrangler models will have a D-ring type setup on the front bumper that a tow bar can connect to, but I'm not aware of any such option for a Ranger. To be honest, such a setup would probably have some play in the connection, which would lead to an unpleasant towing experience with lots of banging and rattling.

The Roadmaster # RM-524459-5 base plate kit you'd looked at would be the proper way to attach your tow bar. If you currently have a Roadmaster tow bar and safety cables, you could reuse those as long as they're still in good condition. To wire up the taillights, I'd recommend the Roadmaster Diode Kit, part # RM-15267. For a braking system unless you have a portable system you can reuse, we really like the Roadmaster Invisibrake, part # RM-8700.

If you click the provided links, you can read some help articles with additional information about flat towing a vehicle.

expert reply by: Mike L

1

Answer 1

Personally I prefer the direct connect base plate kits like the part #RM-524459-5 as they are easier to connect/disconnect, are simpler overall like you said, and require keeping track of fewer things (the crossbar). While the crossbar does add…

view full answer...

Answer 2

The Roadmaster Direct-Connect Base Plate Kit part #RM-524459-5 is a great option for a 2020 Ford Ranger (All Models) and what I recommend using. If you don't already have a tow bar, it will pair perfectly with the Roadmaster Nighthawk All…

view full answer...

Answer 3

Yes, you will need to trim the bumper and underbody panel in order to install the Roadmaster base plate #RM-524459-5 on your 2023 Ford Ranger. You are mainly trimming the bottom of the tow hook opening. It should be a fairly minor amount of cutting.…

view full answer...

Answer 4

Yes, for the 2022 Ford Ranger you should install the Roadmaster Brake-Lite Relay Kit, #RM-88400 along with the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit, #RM-15267; the installation instructions are linked below. Having a Ford vehicle…

view full answer...

Answer 5

It is necessary to have a supplemental braking system installed in your towed vehicle. It is a law in most states in the USA and providences in Canada and if you are traveling through any of them you have to have one. I recommend the Demco SBS…

view full answer...

Answer 6

The Brake Buddy #HM39524 "Select 3" instructions (available at their website) say to not use the 12-volt accessory outlet (the old cigarette lighter outlet) but to rather use the included wiring harness (with included in-line 15 amp fuse)…

view full answer...

Answer 7

The correct way to wire up the breaker that comes with the Roadmaster charge line kit part #RM-156-25 is to have the copper post ran to the positive post of the battery that is charging the other vehicle and the silver side to the battery that is…

view full answer...

Answer 8

I have a video of a 2019 Ford Ranger getting the Roadmaster Crossbar-Style Base Plate Kit #RM-524459-4, which is the same process as the one your referenced, #RM-524459-5. The difference between the 2 is how the tow bar mounts, and the removable…

view full answer...

Answer 9

To flat tow your 2023 Ford Ranger you will need the following parts: Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item #RM-520 and item #RM-643 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item #RM-524459-5…

view full answer...

Answer 10

We have everything you need to flat tow your 2022 Ford Ranger 4x4. The first thing you need is a base plate kit like you mentioned with the Roadmaster part #RM-524459-5 which is the easiest to connect and disconnect from. In addition to the base…

view full answer...

Answer 11

For a direct connect base plate, you'd want to use #RM-524459-5. In order for your #RM-520 Falcon 2 tow bar to work with the base plate, you'll need to remove the D-Ring ends from the ends of the tow bar arms and replace them with the…

view full answer...

Answer 12

For your 2021 Ford Ranger I recommend the Roadmaster Falcon 2 Tow Bar - Motorhome Mount - 2" Hitch - 6,000lbs Item #RM-520 for your tow bar and the Roadmaster Direct-Connect Base Plate Kit - Removable Arms Item #RM-524459-5 for your baseplates.…

view full answer...