Hole Spacing of 45 Inch Long Side-Door Bar Lock Assembly

Question

Question:

Hey I am looking for the bolt spacing on part # PLR3057-45 Thanks

asked by: Alex

0

Expert Reply:

I'll give you a number of different dimensions for the hole spacing as I'm not entirely sure what you were specifically looking for on the 45" Long Side-Door Bar Lock Assembly # PLR3057-45.

From the top mounting hole to the bottom mounting hole (on the hinges) it measures 43-1/2 inches; the closest holes on the hinges are 37 inches apart, and the holes on the hinges are 3-1/4 inches apart.

expert reply by: Kyle S

0

John

4/14/2020

This is a new install,its on a 2020 ATC trailer ,it must be the trim on the door holding it out

Reply

Chris R.

4/15/2020

It could be the trim on your door. Adding a spacer is perfectly okay and should be pretty easy to obtain at a local hardware store. I linked a different answer page that shows a customer-submitted picture with a spacer being utilized just as an example.

Helpful Links

question-319904.html

Reply

John

4/11/2020

Hey I bought this 45in door bar lock and appears that the only way I see it working is to use 1in. Spacers at the hinge,is this a common problem?

Reply

Chris R.

4/13/2020

Adding spacers at the hinge could be needed, but it's really dependent on your specific setup. Are there components on the door that would require more clearance (such as handles, etc)? Are you replacing an existing bar lock assembly or is it a completely new setup?

Reply

Answer 1

Installing the Hinges on your Side-Door Bar Lock Assembly, item #305736, is pretty much up to you and the construction of your trailer. You will need to purchase appropriate hardware to install the Side-Door Bar Lock that you purchased. It is best if…

view full answer...

Answer 2

The closest thing we have to a 2" x 2" bumper is the Rubber Bumper for Enclosed Trailer Ramp Door #37210715 you looked at. This has a 2-1/2" diameter with a height of 1" and a 3/8" mounting hole.

view full answer...

Answer 3

If you already have a seal that you're replacing then you want to get a seal that's a similar size, otherwise if it's a brand new application then I recommend trying to find the depth of the gap and choosing a seal slightly taller since…

view full answer...

Answer 4

The only differences between the Demco Trailer Coupler #DM14976-52 and #DM88XR are the colors and the mounting bracket design. The part DM14976-52 is silver and has a straight, or no-drop, design with the bottom of the coupler being towards the top…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

I do have an option for you but the handles included with the Cam-Action Lockable Door Latch Kits like part #PLR658-SSP must be welded to the pole as there are no other options to attach them. If you can get away with a 55" long pipe then you…

view full answer...

Answer 7

If it's the drop leg like #BD500190 that's bent, you certainly can replace it if it's not bent to the point where you can pull the pin and slide the drop leg out. The #BD500190 would be the proper replacement for a Bulldog #BD500185,…

view full answer...

Hole Spacing of 45 Inch Long Side-Door Bar Lock Assembly

Product Page this Question was Asked From

Continue Researching