Best 2020 Ford Escape Trailer Hitch Options Video

The only 1-1/4" hitch for the 2020 Ford Escape does not fit the hybrid model. I recommend installing the etrailer #e89YR and then using the Trailer Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver #e63YR.

Basically a lot depends on what you will be using the hitch for. If it is just for accessories such as a bike rack or cargo carrier than for the most part you will be fine with a Class II trailer hitch. If you will be towing then I would go with the…

The etrailer hitch part #e89YR that you referenced does fit the hybrid models and will still allow the hands free liftgate to function but you'd have to kick to either side of the hitch opening to activate it.

We have the Draw Tite hitch part #DT92RR that was tested with the hands free liftgate function of your 2020 Ford Escape and it was determined it allowed the function to still work. So this would be the hitch you'd want for your Escape.

With the etrailer #e89YR hitch installed, the receiver tube will block the sensors in the middle of the bumper, but if you wave your foot several inches to the right or left of the receiver, the sensors will pick up the movement and operate the…

Yes, a local mechanic or shop with some experience should have no problem installing a trailer hitch like the etrailer.com Class III #E98854 that you referenced on your 2014 Chrysler Town and Country. This is a relatively straightforward install…

It may be possible to install a trailer hitch receiver like the etrailer Trailer Hitch Receiver #e98854 on your 2016 Chrysler Town and Country with the exhaust still installed. Getting the passenger side bolts out of the frame and installing the…

For the etrailer hitch #e98854 that fits your 2009 Chrysler Town and Country the instructions state that fascia trimming is most likely needed for the Town and Country models like you have. The Draw Tite #75579 that fits your vehicle does not have…

Typically when a monitor gets horizontal lines across it like you are describing it is one of two things. Either the connection cable is bad or the monitor is damaged/failing. Since this is a wireless system without a cable, I would say it is the…

We do have a trailer hitch confirmed to fit all models of the 2020 Ford Escape, including the Hybrid - the etrailer Class III Hitch Receiver #e89YR. This has a 2 inch receiver and a tongue weight capacity of 525 lbs, perfectly suitable for a bike…

To install the etrailer brand #e89YR Class III hitch on your 2021 Ford Escape, you will NOT need to trim the bumper fascia, as you can see in the provided photo and video showing the identical Curt hitch being installed on a 2021 Ford Escape like…

Torsion axles use internal rubber cords to provide the suspension motion and they really are not practical to repair/rebuild. Certainly any axle that was damaged in an accident should be replaced purely for safety reasons. It is potentially possible…