Which Reese Goose Box Adapter Fits 2016 Heartland Edge

Question

Question:

Can you please tell me which Reese Goose Box hitch will work with a 2016 Heartland Edge? Thank you in advance!

asked by: Lee

0

Expert Reply:

I did some research on your 2016 Heartland Edge and it has a Lippert 1621 style pin box and a GVWR of 16,250 lbs so the Goose Box you'd need is the # RP85FR.

expert reply by: Jameson C

0

Answer 1

I reached out to my contact at Lippert and this pin box is not serviceable. Is there a chance you are using an autosliding hitch or something that might exert some leverage on that cushion area? The replacement pin box would be the Lippert #LC328330…

view full answer...

Answer 2

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 3

I would be happy to and thank you so much for the additional information! I just spoke with my rep at Lippert and your 2019 Keystone Montana 3811MS 5th wheel has a 1116 pin box. The Trailair Air Ride 5th Wheel Pin Box item #LC155943 you were looking…

view full answer...

Answer 4

I recommend installing the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1020 on your 2024 Chevrolet Silverado 3500 short bed. This hitch allows you to easily flip over the hitch ball when needed. When not needed you can flip it back…

view full answer...

Answer 5

Because it's lighter, less expensive, has fewer moving parts and is mechanically less complicated I'd recommend going with the Gen-Y #325-GH-8040 shock absorbing pin box versus a Trailair Flex Air like part #LC328492. The Trailair features a…

view full answer...

Answer 6

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Thanks for the photo! I had Lippert run the serial number from the photo, and was told that you have a Lippert 1621 pin box. The compatible Curt Flex Air cushioned pin box is part #LC328492 for an 18K or #LC369535 for a 21K capacity. However, the…

view full answer...