Trailer Hitch with 2 Inch Receiver for 2020 Hyundai Tucson

Question

Question:

I'm looking for the trailer hitch with the 2 inch receiver for my 2020 Hyundai Tucson. Can you confirm which is the correct one? I don't want to order the wrong hitch by accident. Thanks!

asked by: Brian E

0

Expert Reply:

The trailer hitch receiver that fits your 2020 Hyundai Tucson is the Draw-Tite Max-Frame Trailer Hitch Receiver # 75836.

It's definitely a very good idea to get the trailer hitch with the 2 inch receiver, compared to the Draw-Tite # 36572 or Curt # C12241, both of which have a 1-1/4 inch receiver. The reason is there are so many more - and higher quality - options for accessories like bike racks that fit a 2 inch receiver than the smaller 1-1/4 inch receiver.

I have added a photo, as well as a link to the instructions and a video installation for you to check out of the Draw-Tite Max-Frame Trailer Hitch Receiver - 2" # 75836.

expert reply by: Kyle S

0

click to enlarge

Answer 1

Yes, the Curt Trailer Hitch Receiver part #C13240 is indeed a fit for a 2020 Hyundai Tucson which has been confirmed though not only the trailer hitch manufacturer but also ourselves as you can see in the install video below. It will be a great…

view full answer...

Answer 2

The only Hyundai Tucson model that the trailer hitches won't fit is the Night Edition with the dual exhaust tips. As long as your 2020 Hyundai Tucson Sport isn't that edition then you're good to go! Out of the available hitches it's…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The trailer hitch I recommend for a 2020 Hyundai Tucson is the Draw-Tite Max-Frame Trailer Hitch Receiver part #75836 which is a direct bolt-on fit with no cutting or drilling required. The Draw-Tite hitch has a hidden design so only the receiver…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 10

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Trailer Hitch with 2 Inch Receiver for 2020 Hyundai Tucson

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching