Trailer Light Side Replacement Lens for Tracker Trailer

Question

Question:

Looking for a replacement light cover.

asked by: Charles E

0

Expert Reply:

Thanks for the picture of your trailer light! From that I can tell you have a light like part # ST37RB and the correct replacement lens is the # A37RB.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The lights you have on your trailer are #ST37RB and #ST36RB. The replacement lenses are #A39RB for the front lens and #A37RB for the side marker.

view full answer...

Answer 2

We do have a selection of fenders for 13" wheels that you can use to replace your current fenders. Among our linked selection we have different constructions like aluminum, plastic, and steel. These fenders can mount via brackets or welding…

view full answer...

Answer 3

To replace your damaged ST-36 RH, you will need the Optronics Aero Pro Trailer Tail Light - 5 Function - Submersible - Red Lens - Passenger Side #STL0066RBG. This will be a direct replacement and has the exact same plug you currently have.

view full answer...

Answer 4

The Wesbar taillights you were looking at #403026 and #403076 would be a great replacement for your Peterson lights, I can even help you transfer the plugs to the Wesbar lights. First you will want to use wire snips to snip the plug off your…

view full answer...

Answer 5

The "SAE" on a trailer light isn't actually a part number, it stands for Society of Automotive Engineers and just means it has passed certain testing. The only way to determine the correct replacement lens is with the actual part number…

view full answer...

Answer 6

For the taillight assembly part #ST37RB that you referenced there are 2 lens. One of them is the part #A39RB that you referenced that covers the front of the assembly. For the side piece that you referenced you would want the part #A37RB.

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Trailer Light Side Replacement Lens for Tracker Trailer

Product Page this Question was Asked From

Continue Researching