Which Trailer Wiring Harness for 2020 Hyundai Santa Fe

Question

Question:

Which trailer wiring harness do I need for my 2020 Hyundai Santa Fe with the factory tow package?

asked by: John W

0

Expert Reply:

The correct trailer wiring harness for a 2020 Santa Fe with the tow package is the Curt # CU94FR. If you click the link, you can see an installation video showing the harness being installed on a 2019 Santa Fe. The procedure would be the same for your 2020 model.

expert reply by: Mike L

0

Answer 1

For your 2020 Hyundai Santa Fe we have a couple of wiring options. These will both offer a 4 way flat trailer connector. They are almost identical they install the same, have the same power output and are designed to protect your vehicle should there…

view full answer...

Answer 2

It looks like the connector for the tow package on a 2020 Hyundai Santa Fe is hit or miss (more hit than miss) so you may still have it. You'll be looking for a black connector under and behind the driver's side of the bumper (see attached).…

view full answer...

Answer 3

The trailer wiring harnesses we offer for your 2020 Hyundai Santa Fe like the Curt #CU94FR plugs into ports on the vehicle that are on all versions of the vehicle so this kit will fit your vehicle.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Because there haven't been any substantial changes in the 2021 Palisade that would affect the wiring harness fit, the fit for the 2020 model carries over to the 2021 model year. I'd recommend the Curt #CU94FR. The Curt Class III #C13427 hitch…

view full answer...

Answer 6

In order to tow a trailer with a 2020 Hyundai Palisade you will need a trailer hitch, trailer wiring harness, and ball mount/hitch ball at the very least though there may be other items as well depending on the exact trailer. For a trailer hitch, I…

view full answer...

Answer 7

The Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector #CU94FR according to the manufacturer fits vehicle without the factory tow package. You can confirm you have the tow wiring harness this connects to…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 10

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 11

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 12

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Which Trailer Wiring Harness for 2020 Hyundai Santa Fe

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching