Trailer Hitch and Tow Capacity of 2018 Lexus RX 350

Question

Question:

The 2018 RX350 owners manual states that when towing trailers over 2k gross weight a sway control device with sufficient capacity is required. What sway control device is sufficient for the RX350s 3500 lb towing capacity that is compatible with this hitch?

asked by: Justin B

0

Expert Reply:

I Googled the owner's manual for a 2018 Lexus RX 350 and it said the maximum towing capacity was 3,500 lbs, and the Curt Trailer Hitch Receiver # C13272 has a 4,000 lb towing capacity so you will not have any problems using this hitch for towing less than the 3,000 lbs you mentioned. That said, we do recommend verifying all towing capacity information with vehicle manufacturers as they have the final say on these matters.

expert reply by: Kyle S

0

Justin B.

1/29/2020

The 2018 RX350 owners manual states that when towing trailers over 2k gross weight a sway control device with sufficient capacity is required. What sway control device is sufficient for the RX350s 3500 lb towing capacity that is compatible with this hitch?

Reply

Kyle S.

1/29/2020

Since you need sway control, the best option is a weight distribution system with sway control, and for your 2018 Lexus RX350 that has a 3,500 lb towing capacity, I recommend the Equal-i-zer Weight Distribution System with 4-Point Sway Control # EQ37040ET or, for a more budget-friendly option, the Fastway e2 Weight Distribution with 2-Point Sway Control # FA92-00-0450. The difference is the Equal-i-zer gives you the absolute best in sway control so you are going to have the smoothest ride possible even when encountering crosswinds or passing a semi on the highway, but at a more premium price. The Fastway is also effective though does have less total sway control than the Equal-i-zer, which is why it is a lesser price. The Fastway is a good option for a small trailer, though I always err on the side of having the most control possible when towing, which is why if it were me I'd go with the Equal-i-zer. That system comes with the 2" hitch ball, but it is needed separately for the Fastway system: - Equal-i-zer Weight Distribution System with 4-Point Sway Control # EQ37040ET or - Fastway e2 Weight Distribution with 2-Point Sway Control # FA92-00-0450 with 2" Hitch Ball # 40038 I have added links to video reviews of these parts for you to check out as well.

Reply

Answer 1

Yes we do! For your 2018 Lexus RX 350 F-Sport model we have the Curt Class III Receiver Hitch #C13272. This is currently the only hitch available that is confirmed to fit the F-Sport model. It will install by using existing holes in the vehicle's…

view full answer...

Answer 2

The customer service representative you spoke to is correct. We used to list the Curt Trailer Hitch Receiver #C13272 you were looking at as a fit for the 2017 Lexus RX 350 F-Sport, but after multiple fitment issues from customers we changed the fit…

view full answer...

Answer 3

I spoke to the manufacturer and they said the kick sensor isn't effected by the hitch being installed. This is a straight forward install. I have attached a video to help walk you through the process of getting part #C13272 installed on your 2019…

view full answer...

Answer 4

There's a possibility you could add enough washers to the install hardware of the Draw Tite hitch part #75540 to allow it to fit under the rear bumper without trimming but since that would void the warranty of the hitch we cannot recommend that.…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 12

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...