Will Brass Tire Sensors # TM-2BRASS Work with TireMinder TM-77 TPMS

Question

Question:

I have the TireMinder TM77. In your description you didn’t list the 77. Is it compatible? If not, do you have transmitters that are compatible and what is the cost? Thank you

asked by: Casper

0

Expert Reply:

The Brass Tire Sensors # TM-2Brass you referenced are indeed compatible with your TM-77 model TireMinder Tire Pressure Monitoring System. I verified this with TireMinder directly.

This kit includes the two brass sensors and the needed CR1632 batteries as well. I have attached a short video review that you can also check out.

expert reply by: Chris R

0

Answer 1

I believe we have exactly what you're looking for, for your TireMinder tire pressure monitoring system. We have the: -Aluminum Tire Sensors for TireMinder TPMS #TM-2ALUM. & -The Brass Tire Sensors for TireMinder TPMS #TM-2Brass. Both of these…

view full answer...

Answer 2

Yes, we have a TireMinder system with 10 sensors, the TireMinder i10 TPMS for RVs and Trailers w/ Signal Booster - 10 Tire Sensors #TM56FR.

view full answer...

Answer 3

Yes. You will be able to use these Brass Tire Sensors for TireMinder #TM-2BRASS with your TM66. From what I was able to find out, the TM66 system is the same system as the Tire Minder TPMS for RVs #TM-A1A-4 and #TM-A1A-6 ; the only difference is that…

view full answer...

Answer 4

The TireMinder i10 TPMS for RVs - LCD Monitor - Signal Booster - 10 External Tire Sensors #TM56FR only comes with the 10 sensors for brass valve cores, but I do have a way that you can get exactly what you're needing. What you can do is get the…

view full answer...

Answer 5

This is a good question, and it's going to vary between RVs and towed vehicles, so I'll try to break this down. The short version of this is that for your setup you'll want to use brass transmitters. Towed vehicles will have either rubber…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...