Replacement Tire Sensors For The TireMinder Tire Pressure Monitoring System

Question

Question:

I need a replacement for one of my tire minder valves Can you help

asked by: Jim D

0

Expert Reply:

I believe we have exactly what you're looking for, for your TireMinder tire pressure monitoring system.

We have the:

-Aluminum Tire Sensors for TireMinder TPMS # TM-2ALUM.

&

-The Brass Tire Sensors for TireMinder TPMS # TM-2Brass.

Both of these systems will work with the TM-A1A-4, TM-A1A-6, TPMS-APP-4, and TPMS-APP-6 TPMS systems.

expert reply by: Bryce D

0

Answer 1

Since you already have a Blue Ox tow bar you are going to want the Blue Ox Base Plate Kit item #BLU93FR. This base plate kit has removable arms that will leave your Colorado looking as close to factory as possible when you are not flat towing. This…

view full answer...

Answer 2

Yes, we have a TireMinder system with 10 sensors, the TireMinder i10 TPMS for RVs and Trailers w/ Signal Booster - 10 Tire Sensors #TM56FR.

view full answer...

Answer 3

According to Tire Minder's website you will only need aluminum sensors like the item #TM-2ALUM if you're towing a car or light truck with built-in TPMS that has aluminum valve stems. For your 2017 Mercedes-Benz Sprinter 3500 I recommend the…

view full answer...

Answer 4

The TireMinder i10 TPMS for RVs - LCD Monitor - Signal Booster - 10 External Tire Sensors #TM56FR only comes with the 10 sensors for brass valve cores, but I do have a way that you can get exactly what you're needing. What you can do is get the…

view full answer...

Answer 5

The difference is basically the monitor setup. The part #TM79FR comes with a monitor whereas the #TM56FR is designed to sync to a smart phone. The #TM79FR does not have a way to connect to smart phone.

view full answer...

Answer 6

By 'transmitter', I believe you're speaking of the repeater/booster included with the #TM79FR Tire Minder TPMS that boosts the signal from the sensors to the monitor. The folks at Tire minder tell me that the installing the booster inside…

view full answer...

Answer 7

As long as you use valve extenders that are not airless (don't hold air) and are constructed of brass or steel, like the Wheel Masters #WM8005 which do hold air, so they will be compatible with a TireMinder system. TireMinder has a few different…

view full answer...

Answer 8

What you can do is get the TireMinder i10 TPMS for RVs - LCD Monitor - Signal Booster - 4 External Tire Sensors #TM89FR and then also order 3 of the part #TM-2ALUM which comes with 2 of the aluminum tire sensors. This will give you the 6 aluminum…

view full answer...

Answer 9

The sensor type needed for your motorhome and trailer is going to depend on the type of valve stems you have. If you have a rubber valve stem, you will need brass transmitters. If you have a metal valve stem, you will need aluminum transmitters. The…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Replacement Tire Sensors For The TireMinder Tire Pressure Monitoring System

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching