Tonneau Cover and Bed Mat Recommendation for a 2019 Chevy Silverado 1500 5-3/4 Foot Bed

Question

Question:

I am looking for a good tonneau cover and bed mat for my 19 Silverado 1500 super short bed.

asked by: Dave

0

Expert Reply:

The tonneau cover and bed mat combo I recommend for a 2019 Chevy Silverado 1500 with 5-3/4' bed is the BAKFlip MX4 Hard Tonneau Cover part # BAK448130 and BedRug Custom Truck Bed Mat part # BMC19CCS. The BAKFlip MX4 is one of my favorite options on the market because it has a very clean, flush look once installed and it is very durable so much so that you can even place items on top (up to 400 lbs). The BAKFlip MX4 is also very easy to install.

The BedRug Custom Truck Bed Mat will pair nicely with the BAKFlip MX4 working to protect contents inside and also provide a cushion when crawling in and out of the bed. I have attached an install video for you as well.

expert reply by: Conner L

0

Answer 1

When the Firestone Ride Rite kit part #F2609 is installed on your 2019 Chevy Silverado 1500 and there is only the minimum air pressure in the bags of 5 psi the ride quality would not be affected. It's hard to say why your Ram had issues but there…

view full answer...

Answer 2

I got in touch with Extang and they said that the Extang Encore Hard Folding Tonneau Cover will not work with the 2021 GMC Sierra 1500 with MultiPro Tailgate. This is because the Encore's rails will interfere with the way the MultiPro Tailgate…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Hey Dustin, thanks for reaching out! I will recommend SumoSprings over Timbrens all day everyday because they are much more forgiving when the vehicle is unloaded. We've actually joked around here about how the Timbren kits will either give you…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

There's not many differences between the Air Lift WirelessONE item #AL25980EZ and item #AL25980. The main difference is that the item #AL25980EZ has a slightly higher CFM at 1.03 compared to 0.92 and it runs slightly more efficient at 9% over 15%…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 11

When installing an awning like the Solera Smart Arm 12V Power RV Awning #LC517486, the arms will be secured to the wall framing. When the awning extends there will be quite a bit of leverage, so it is important to mount the awning to an area where…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...