Which TracRac Sliding Ladder Rack Fits Both 2005 Toyota Tundra and 2002 Chevy Silverado

Question

Question:

Will the same Thule TracRac SR Sliding Truck Bed Ladder Rack fit multiple pickups? Will the same rack fit both a 2005 Tundra and a 2002 Silverado - both short beds? Thank you,

asked by: Brian O

1

Helpful Expert Reply:

The TracRac sliding ladder rack part numbers in general don't have a really wide fit application. Typically it's a pretty small year range of the exact same truck model and brand. But never between vehicle manufacturers.

So a 2005 Toyota Tundra 6 foot bed would use the part # TH43002XT-505 and the 2002 Silverado would use the # TH43002XT-501.

expert reply by: Jameson C

1

Answer 1

Thanks for sending us a picture of your BAK tonneau cover! That makes it easy for me to say that the TracRac SR Sliding Truck Bed Ladder Rack part #TH43002XT-501 that you referenced would be a confirmed fit. Since your tonneau allows access to the…

view full answer...

Answer 2

Just like the BAK Revolver X2, the Revolver X4 (only difference between the two is the sheen on the tarp) is also compatible with the Thule TracRac SR Truck Bed Ladder Rack you'd looked at, part #TH43002XT-501. As you can see in the provided…

view full answer...

Answer 3

You can use a Thule TracRac SR sliding ladder rack with a BAKFlip G2 tonneau cover on your 2018 Ford F-150; you should be aware that the rails of the TracRac may rub the edges of the G2 because of how the tonneau installs. If you take a look at the…

view full answer...

Answer 4

The BAK Revolver X2 Hard Tonneau Cover part #BAK39120 and the TracRac SR Sliding Truck Bed Ladder Rack part #TH43002XT-782 are both a confirmed fit for your 2017 GMC Sierra, if you have a 5-1/2' bed. For a 6-1/2' bed, you will want part…

view full answer...

Answer 5

Tonneau covers and ladder racks often interfere with each other when they use the same mounting points on the truck. But since you have the excellent BAK Revolver cover on your 2016 F-150 you can still install a ladder rack from Thule, the TracRac SR…

view full answer...

Answer 6

We have exactly what you're looking for with the Thule TracRac SR Sliding Truck Bed Ladder Rack #TH43002XT-508 or you can use the part #TH43002XT-508EX which adds the over-the-cab cantilever for longer loads. This uses the shorter base rails for…

view full answer...

Answer 7

The Thule TracRac SR Sliding Truck Bed Ladder Racks like the part #TH43003XT-501 that you are looking at use T-track base rails so that the uprights can be adjusted along the length of the truck bed. The actual width of the uprights though cannot be…

view full answer...

Answer 8

The 2020 Ford F-150 with BAKFlip G2 folding tonneau cover is compatible with the Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever - 1,250 lbs #TH43002XT-508EX. The sliding rack rails mount in the stake pockets and will work with your…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

The ability to use a tonneau cover is going to depend on how that factory tonneau cover mounts to the bed of your 2020 Ford F-150. If the cover just clamps onto the inner lip of the bedrails and doesn't cover up your stake pockets then you can…

view full answer...

Answer 11

Hi Ruben; thanks for the question, and while there is one rack for your 2023 Ford F-150 with a 6-1/2' bed compatible with the Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover #PE66UV, it does not have sides, and is part #TX84NV.…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...