Is TracRac SR Sliding Ladder Rack Compatible With BAKFlip G2 Tonneau Cover on 2018 Ford F-150

Question

Question:

Can I use tracRac with a G2 BakFlip tonneau cover on 2018 f150

asked by: Jim

1

Helpful Expert Reply:

You can use a Thule TracRac SR sliding ladder rack with a BAKFlip G2 tonneau cover on your 2018 Ford F-150; you should be aware that the rails of the TracRac may rub the edges of the G2 because of how the tonneau installs. If you take a look at the accompanying photo you can see how the edges of the cover are close to the stake pockets. You will also likely need to move the rear upright as far forward as possible to allow the tonneau's panels to clear the rack's bars.

The parts that fit your '18 Ford F-150 will depend on your bed size.

For a 5-1/2 foot bed:
- BAKFlip G2 Hard Tonneau Cover # BAK26329
- Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-508

For a 6-1/2 foot bed:
- BAKFlip G2 Hard Tonneau Cover # BAK26327
- Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-501

For an 8 foot bed:
- BAKFlip G2 Hard Tonneau Cover # BAK26328
- Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43003XT-000

I have added links to video reviews of both the tonneau cover and ladder rack for you to check out.

expert reply by: Kyle S

1

click to enlarge

Answer 1

The BAK Revolver X2 Hard Tonneau Cover part #BAK39120 and the TracRac SR Sliding Truck Bed Ladder Rack part #TH43002XT-782 are both a confirmed fit for your 2017 GMC Sierra, if you have a 5-1/2' bed. For a 6-1/2' bed, you will want part…

view full answer...

Answer 2

Just like the BAK Revolver X2, the Revolver X4 (only difference between the two is the sheen on the tarp) is also compatible with the Thule TracRac SR Truck Bed Ladder Rack you'd looked at, part #TH43002XT-501. As you can see in the provided…

view full answer...

Answer 3

Thanks for sending us a picture of your BAK tonneau cover! That makes it easy for me to say that the TracRac SR Sliding Truck Bed Ladder Rack part #TH43002XT-501 that you referenced would be a confirmed fit. Since your tonneau allows access to the…

view full answer...

Answer 4

The TracRac sliding ladder rack part numbers in general don't have a really wide fit application. Typically it's a pretty small year range of the exact same truck model and brand. But never between vehicle manufacturers. So a 2005 Toyota…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 9

Hi Ruben; thanks for the question, and while there is one rack for your 2023 Ford F-150 with a 6-1/2' bed compatible with the Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover #PE66UV, it does not have sides, and is part #TX84NV.…

view full answer...

Answer 10

Hey Chad, so I'd actually recommend a mid size ladder rack like the Yakima OutPost HD Overland Truck Bed Rack #Y01152-58. This is by far going to be your best bet if you don't want to trailer your kayaks. These bars have a 500 lb weight…

view full answer...

Answer 11

The Tow Ready wiring harness #118571 is rated for 7.5 amps for brake lights and turn signals and 7.5 amps total for running lights. The fuse that goes on the power wire connection to the battery is a 10 amp fuse. The wire gauge of the long 12 volt…

view full answer...

Answer 12

Actually our etrailer.com brand brake assemblies are rebranded AxleTek assemblies. So we have the 8k left and right assembly set #AKEBRK-8 which is most likely what you need but these are 12-1/4 inch in diameter by 3-3/8 inches wide and attach with a…

view full answer...

Is TracRac SR Sliding Ladder Rack Compatible With BAKFlip G2 Tonneau Cover on 2018 Ford F-150

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching