Will The TracRac SR and the Revolver X2 Work Together On My 2017 GMC Sierra

Question

Question:

Do you have a ladder rack and tonneau that I can that will work together on a 2017 GMC Sierra short bed pickup truck. I am interested in the BAK Revolver X2 and TracRac SR. Can you tell me if this combo works together. I would be open to other suggestions also.

asked by: Mike

0

Expert Reply:

The BAK Revolver X2 Hard Tonneau Cover part # BAK39120 and the TracRac SR Sliding Truck Bed Ladder Rack part # TH43002XT-782 are both a confirmed fit for your 2017 GMC Sierra, if you have a 5-1/2' bed. For a 6-1/2' bed, you will want part # BAK39121 and part # TH43002XT-781. In addition to both being compatible with your truck, they will also both work with one another as the TracRac SR mounts to the top of the trucks bed rails and the Revolver X2 mounts just inside the bed rail lip. Therefore, they will not interfere with one another while installed simultaneously.

I have also attached a video review of this tonneau cover for you.

expert reply by: Conner L

0

Answer 1

The TracRac sliding ladder rack part numbers in general don't have a really wide fit application. Typically it's a pretty small year range of the exact same truck model and brand. But never between vehicle manufacturers. So a 2005 Toyota…

view full answer...

Answer 2

You can use a Thule TracRac SR sliding ladder rack with a BAKFlip G2 tonneau cover on your 2018 Ford F-150; you should be aware that the rails of the TracRac may rub the edges of the G2 because of how the tonneau installs. If you take a look at the…

view full answer...

Answer 3

Thanks for sending us a picture of your BAK tonneau cover! That makes it easy for me to say that the TracRac SR Sliding Truck Bed Ladder Rack part #TH43002XT-501 that you referenced would be a confirmed fit. Since your tonneau allows access to the…

view full answer...

Answer 4

Just like the BAK Revolver X2, the Revolver X4 (only difference between the two is the sheen on the tarp) is also compatible with the Thule TracRac SR Truck Bed Ladder Rack you'd looked at, part #TH43002XT-501. As you can see in the provided…

view full answer...

Answer 5

I did some research and reached out to my contact at BAK to get some information. They confirmed the REV brand is a private label of basically the same products in the BAK tonneau cover line of products. They have both a GM and a Ford line that is…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 9

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 10

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 11

Hi Ruben; thanks for the question, and while there is one rack for your 2023 Ford F-150 with a 6-1/2' bed compatible with the Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover #PE66UV, it does not have sides, and is part #TX84NV.…

view full answer...

Answer 12

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Will The TracRac SR and the Revolver X2 Work Together On My 2017 GMC Sierra

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching