Aluminum Scissor Steps AS23 Dimensions

Question

Question:

description says 24 to 30 inches tall. is that to the top bracket or the top of the top step?

asked by: Boyd H

0

Expert Reply:

The height measurement on the item you selected is 24 to 30 inches to the mounting bracket. As long as the distance from the area the stairs are to be mounted straight down to the ground is within this 6 inch range the stairs will work nicely. We have other sizes of steps (see links below) if this size is not correct for you. I have posted links to hand rails for the adjustable steps also. If I can be of further assistance let me know.

expert reply by: Robert G

0

Answer 1

The Brophy Camper Scissor Steps - 4 Steps #AS24 would work perfectly with your 2001 King of the Road fifth wheel camper. The steps are 24" wide, expand from 31" to 39" tall with a distance from the top of one step to the top of the…

view full answer...

Answer 2

The handrail #AHR4 will fit Brophy and most other 4-step scissor steps. There are so many possible step brands that you likely have a set that is compatible. But to be sure I have linked a video that covers the railing and how it would install.…

view full answer...

Answer 3

Hey Al, this is a great question but since you have free-backing plates now you would never need to mess with the manual lock out of your Atwood coupler.

view full answer...

Answer 4

Are you basically asking how much length would this coupler add to the tongue of your trailer?

view full answer...

Answer 5

You can use the Go Power #34264403 Automatic Transfer Switch for 30 amp service. This transfer switch automatically changes from inverter to shore power when you hook up at the campground. It also protects your electrical system from AC power…

view full answer...

Answer 6

The mounting bracket for the Brophy Camper Scissor Steps #AS23 is 24 inches long and has 5 mounting holes spaced 5-1/4 inches apart. The end mounting holes are 1-1/2 inches from each side. Also, each angle is 1 inch wide. If you're looking for…

view full answer...

Answer 7

The power converter of the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger - 35 Amp #PD4135K does not also serve as an inverter to supply 110 volt power from the DC battery. It simply converts the AC shore…

view full answer...

Answer 8

I attached a wiring diagram for the Progressive Dynamics Converter #PD4135K for you to check out. On the right side of the diagram you'll see the connections that run to the battery and on the left side you see the connections that you'd run…

view full answer...

Answer 9

Yes, any 12 volt power accessory is going to function as long as the battery/batteries are charged even if you are not connected to shore power. You want to run the 12 volt accessories through the Progressive Dynamics RV Power Control Center with…

view full answer...

Answer 10

It is too small of a space to fit the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 375lbs - Black Bracket Item #TLA7834 but you can instead mount it to the bumper of your camper like in the attached picture.

view full answer...

Answer 11

The Brophy Camper Scissor Steps for truck campers, #AS04, are intended for an entry height of 31" to 40". If your camper door sets within that 31-40' range then yes this will fit your rig. Please see attached image for measuring points…

view full answer...