Parts Needed to Add Electric Brakes to a Dexter Torflex #9 Axle?
Question:
I have a 2015 Little Guys Silver Shadow 5X10 tear trailer to which I want to add electric brakes from scratch. The axle is a Dexter Torflex #9, either 2,000 lb or 2,200 lb I cant read the imprint, and it has the 4 bolt brake flange already installed. The dry weight of the trailer is about 1,200 lbs. It has 14 inch wheels in a 5X4.5 pattern. I havent disassembled it yet to get a bearing part number. I previously bought and installed the seven pin harness and brake controller from you. Now I need the rest of the parts. The 7 inch electric brakes and hubs Im looking at online seem only recommended for 13 inch or smaller wheels. Can you make a recommendation? Aside from two electric brakes and two hubs/drums is there anything else I need to buy to complete the installation? Seal, bearings, etc?
asked by: Dave B
Expert Reply:
Most 7 inch hub drums aren't compatible with 14 inch wheels, but the Dexter # 8-257-5UC3-EZ is an exception because it will adequately support the wheel.
This hub uses the L44649 inner and outer bearing which is compatible with the spindles on your Torflex # 9 axle beam. The bearings, races, grease seal, grease cap and lug nuts are included. The hub/drums are sold individually.
You'll also need a left hand brake assembly, like # 23-47 and a right hand like # 23-48. The assemblies have mounting studs, and the necessary mounting hardware is included.
I'd also recommend a wiring upgrade kit like # HS381-9000. You'll also need some # 10-1-1 wire to run the brake lines from the junction box to the brake assemblies. Keep in mind that the wire color code in the included trailer connector is different that usual.
Products Referenced in This Question
Dexter Electric Trailer Brake Assembly - 7" - Left Hand - - 2,000-lbs to 2,200-lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 2000 lbs
- 2200 lbs
- Brake Assembly
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- Dexter
more information >
Dexter Electric Trailer Brake Assembly - 7" - Right Hand - 2,000-lbs to 2,200-lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 2000 lbs
- 2200 lbs
- Brake Assembly
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- Dexter
more information >
Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles - 7" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Mounting Hardware for 10" Single Brake Assembly
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 10 Inch
- Redline
more information >
Wiring Kit for Hydrastar Electric Over Hydraulic Actuators
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Wiring
- Hydrastar
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Trailer Wiring
- Video: Curt Class III Trailer Hitch Installation - 2021 Subaru Outback Wagon
- Video: Stealth Hitches Hidden Rack Receiver Installation - 2020 Subaru Outback Wagon
- Video: Draw-Tite Max-Frame Trailer Hitch Installation - 2021 Subaru Outback Wagon DT73RR
- Video: Tekonsha T-One Vehicle Wiring Harness Installation - 2021 Subaru Outback Wagon
- Video: etrailer Class III Trailer Hitch Installation - 2022 Subaru Outback Wagon
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit - Custom Fit - 2"
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt LED 4-Way Flat Connector (Vehicle End) Tester
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Search Results: fishwire tool
- Shop: Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles - 7" Diameter - 5 on 4-1/2
- Video: Review of Thule Replacement Pocket Nut TracRac SR Sliding Ladder Rack Base Rail - TA01-2100N
- Video: Dexter Axle Trailer Axles K71-707-02 Review
- Shop: Brake Controller
- Search Results: tracrac one
- Q&A: Lift Kit and Brackets for Top Mount Torflex 3500 lb Axles on Horse Trailer
- Q&A: Lift Kit for 1,500 lb #9 Torfllex Dexter Axle
- Q&A: Measurements For Mounting Bolt Holes On Torflex Lift Kit # K71-707-02
- Q&A: Correct Lift Kit for a #10 Torflex Single Axle on a Lance 1575 Travel Trailer
- Q&A: How to Tell What Number Torflex Axle is on Trailer
- Q&A: Axle Riser Kit for a 2,000 lb Lippert Torsion Axle with Mounting Holes on Top
- Q&A: How to Determine if a Torsion Axle Needs to be Replaced and Lifting a Trailer Off the Ground
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Adding Electric Over Hydraulic Disc Brakes
- Search Results: tank monitor
- Search Results: coupler