Has EcoHitch for 2015 Tesla Model S P85D had Galvanic Corrosion Issue Fixed

Question

Question:

Have they addressed the corrosion issues with the aluminum body Tesla?

asked by: Nathaniel

1

Helpful Expert Reply:

Yes, the EcoHitch Stealth part # 306-X7201 comes with washers that were designed to prevent galvanic corrosion due to dissimilar metals between the hitch material and the body/frame material of your 2015 Tesla Model S so you would not need to worry about that!

expert reply by: Jameson C

1

Answer 1

We had a chance to install the EcoHitch Stealth Hitch part #306-X7201 on a similar 2016 Tesla Model S as your 2014 model that I attached a link to the video of on this page. The install would be very similar to the Draw Tite part #24958 that also…

view full answer...

Answer 2

The Eco-Hitch Trailer Hitch Receiver #306-X7201 install will be dependent on your mechanical expertise. It has a difficulty level of 10 out of 10. It requires temporary removal of bumper/fascia during, fascia trimming, it is necessary to drill a hole…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 7

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 8

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 9

To add a hitch to your 2024 Jeep Grand Cherokee L, I recommend the Draw-Tite item #DT42GR. This hitch is custom fit and bolts to your Jeep with included hardware. This is a class III hitch with a 2" receiver. It has a 7,500 lbs towing capacity…

view full answer...

Has EcoHitch for 2015 Tesla Model S P85D had Galvanic Corrosion Issue Fixed

Product Page this Question was Asked From

Continue Researching