How to Replace Ratcheting Clamp for Extang Solid Fold 2.0 Tonneau Cover

Question

Question:

How do you replace the ratchetting clamp on Extang 2.0 bed cover

asked by: Wayne E

0

Expert Reply:

To replace the clamp on your Extang Solid Fold 2.0 you need to remove the clamp cover (there is a screw that needs to be removed first) and then you can remove the clamp for replacement.

If you have a different Extang 2.0 tonneau cover please let me know and I can help you find out how to replace the clamp.

expert reply by: Jon G

0

Answer 1

I can help you with the process of replacing the Tail Clamp Assembly #EX1035 for your Extang Solid Fold or Solid Fold 2.0 tonneau cover. The replacement process will be different depending on if your existing cover is the Solid Fold or the Solid Fold…

view full answer...

Answer 2

In order to install the Replacement Tail Clamp Assembly for Extang Solid Fold and Trifecta Tonneau Covers part #EX1035 you'll simply remove the hinge cap, slide the old clamp off, slide the new clamp on, then reinstalled the hinge cap. I have…

view full answer...

Answer 3

Thanks for the picture of the latch you are needing. Based on that you are in need of the part #EX1035 which is a replacement tail clamp assembly for the Solid Fold.

view full answer...

Answer 4

To install the Extang Replacement Tail Clamp Assembly #EX1035 into an Extang Solid Fold you will need to cut a notch in the channel. A spot near the middle of the cover is preferred. Usually you'll only need to make a notch on one side of the…

view full answer...

Answer 5

Tail clamp #EX1035 does fit the Extang Trifecta Tonneau covers. But, if you have a 1999 or newer Ford Super Duty then you will instead need #EX1042.

view full answer...

Answer 6

The Replacement Tail Clamp Assembly for Extang Solid Fold and Trifecta Tonneau Covers - Qty 1 #EX1035 is the correct replacement part unless you have a 1999 or newer Ford Super Duty truck which will instead use #EX1042. To install the replacement…

view full answer...

Answer 7

Regarding the pin you hope to replace, we do not carry the Gator brand of tonneau covers and parts. You would have to locate a Gator dealer to potentially find a part. If your tonneau cover is having parts problems it may be time for a new cover. You…

view full answer...

Answer 8

The correct replacement cab clamp for the Extang Solid Fold 2.0 that you need is part #EX42FJ.

view full answer...

Answer 9

To install the Extang Replacement Tail Clamp Assembly #EX1035 into an Extang Solid Fold 2.0 Hard Tonneau Cover like #EX83651 you will need to cut a notch in the channel. A spot near the middle of the cover is preferred. Usually you'll only need…

view full answer...

Answer 10

The Replacement Jaw Grip Clamp for Extang Solid Fold 2.0 Tonneau Covers #EX1035 and front clamp #EX42FJ have a very basic design of a bolt with a nut on the end. You will remove the hinge cap or latch pocket cover from the cover and simply slide out…

view full answer...

Answer 11

The Extang #EX1032 replacement hinge that you referenced is made for Extang Trifecta and Extang eMAX folding tonneau covers as a hinge replacement. I reached out to my contact at Extang and found out that they also make the Gator covers and that this…

view full answer...

Answer 12

If you have the Extang Solid Fold or Solid Fold 2.0 Tonneau Cover, it sounds like you are just needing the Replacement Tail Clamp Assembly #EX1035. This includes 1 complete tail clamp assembly and will be a direct replacement for a tail clamp on your…

view full answer...

How to Replace Ratcheting Clamp for Extang Solid Fold 2.0 Tonneau Cover

Product Page this Question was Asked From

Continue Researching