Replacement Right Side Fender for Demco Kar Kaddy Tow Dolly

Question

Question:

I need the right fender, part no. 5983, do you carry this item?

asked by: Richard

0

Expert Reply:

Yes, we do have the right side replacement fender for your Demco Kar Kaddy # DM9713045 with the part # DR74FR (which is the same as the part number you mentioned). If you also need the left side this is available with part # DM5982.

expert reply by: Chris R

0

Answer 1

For the driver side you'd want the part #DM37FR and for the passenger side #DM97FR according to my contact at Demco who verified the dimensions you are in need of.

view full answer...

Answer 2

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 3

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 4

Hey there Jeff, thanks for the question and I can definitely get you all the parts needed to flat tow your 2014 Chevy Silverado 1500 behind your motorhome. I'll go ahead and list everything out for you to make it easy to order. - Base Plate Kit:…

view full answer...

Answer 5

Hi Randy, For your 2022 Jeep Gladiator I have the following flat towing component recommendations: Baseplate: If you have a standard model with a factory bumper or a Rubicon with a factory bumper then you can use the Roadmaster Direct-Connect Base…

view full answer...

Answer 6

To determine if your motorhome has the Tiffin air brake setup or Freightliner BrakeSync you'll need to look at the rear and see if there's an quick disconnect fitting for your air line. The standard Tiffin air coupler fitting would look like…

view full answer...

Answer 7

What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hi Robert; hopefully your Roadmaster tow bar is one that attaches to direct-connect base plates as opposed to crossbar base plates; for example the 8,000 lb Roadmaster Sterling would be optimal. Assuming that, here is what you need to flat tow your…

view full answer...

Answer 10

There are a few differences between the Demco Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor #DM86VR and the Roadmaster InvisiBrake Supplemental Braking System #RM-8700. The biggest difference between the two is…

view full answer...

Answer 11

The Blue Ox Patriot Portable Braking System - Proportional #BLU37TR, uses a 12V powered remote that wirelessly connects to the 12V powered braking unit. This wireless remote has an inertia-based sensor in it that can sense the braking of the towing…

view full answer...

Answer 12

Here are the steps to prepare your 2023 Ford Bronco Big Bend for flat towing. The transfer case and transmission will be in neutral with the ignition off. This information is in your owners manual. Switching Neutral Tow On 1.Switch your vehicle to…

view full answer...

Replacement Right Side Fender for Demco Kar Kaddy Tow Dolly

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching