Parts Needed for Swapping a 2015 Curt Q20 Sliding Hitch into 2019 F-350 Superduty

Question

Question:

I have a Curt Q20 sliding hitch which was in my 2015 F-250. I just purchased a 2019 F-350 with the factory 5th wheel puck system installed. The old mounting rails for the Q20 stayed with the old 2015 truck, because the saleman told me that they were obsolete. What can I purchase to mount my Q20 Sliding hitch to the 2019 F-350 5th wheel puck system?

asked by: John B

0

Expert Reply:

To use your Curt Q20 head in your 2019 Ford F-350 SuperDuty you will use the Curt 5th Wheel Round Tube Slider # C16020, which is the slider that fits in the factory pucks on your truck. The # C16020 works with Curt A16, E16, Q16, Q20, and Q24 5th-wheel trailer hitch heads.

expert reply by: Erik B

0

Answer 1

Yes, you can mount your Curt A25 sliding 5th wheel hitch part #C35DR into the adapter that fits your 2019 Ford F-350. All you would need is the following: - Adapter Rails for Curt 5th Wheel Hitch #C88KR

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Parts Needed for Swapping a 2015 Curt Q20 Sliding Hitch into 2019 F-350 Superduty

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching