Higher Capacity Trailer Hitch that Fits 1998 Dodge Ram 3500

Question

Question:

I am looking for a larger weight rating for this truck and most likely need to change the factory hitch

asked by: Wade F

1

Helpful Expert Reply:

While we don't have a way to increase the weight capacity of your 1998 Dodge Ram 3500 we do have really high capacity hitches that fit your truck like the Curt hitch part # C15319 that have a 16,000 lb trailer weight capacity and a tongue weight capacity of 2,400 lbs.

expert reply by: Jameson C

1

Answer 1

In order to determine what rise/drop ball mount you need, you'll need to take some measurements. Measure the distance from the inside top of the receiver opening to the ground. Then with a level trailer, measure the distance from the underside of…

view full answer...

Answer 2

To determine the rise or drop needed, jack up the trailer so that the frame is level to the ground. Measure from the bottom of the coupler to the ground. Then, measure from the top of the receiver opening on the trailer hitch to the ground. The…

view full answer...

Answer 3

In some cases trailer hitches can get slightly bent in shipping. Most likely that is not the case for the Curt Hitch part #C15319 since it is such a heavy duty hitch, but it is a possibility. If you can get all the bolts started I would recommend…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Answer 10

No, they do not but I have a set that does. They are the Reese Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches item #RP30035. These are confirmed to fit the 2002 Ram 2500 with the 6-1/2' and 8' bed lengths. I have…

view full answer...

Answer 11

We offer three Class V Curt hitches for your 1995 Dodge Ram 3500 4WD Dually Diesel that can be seen on the linked page. All share the same 2400-lb tongue weight (TW) and 16K maximum trailer weight ratings, and all increase to 17K GTW if used with a…

view full answer...

Answer 12

I did a little research on your 2001 Dodge Ram 3500 and found that it's max towing capacity is listed as 13,900 lbs. I would strongly recommend you check the owners manual of your truck to see what Dodge lists as the capacity for your truck and…

view full answer...

Higher Capacity Trailer Hitch that Fits 1998 Dodge Ram 3500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching