Which Slider Base Fits with Curt Q25 Fifth Wheel Hitch Head

Question

Question:

Can Part C16550 be used on a Curt Q25 head? I understand the rails are rated to 20k thus reducing my towing capacity.

asked by: Danny

0

Expert Reply:

The Curt Q25 hitch head is supposed to be paired with the R24 slider part # C16570. The head you have now would not fit on the slider kit # C16550.

The complete Q25 slider hitch part number is # C16566.

expert reply by: Jameson C

0

Answer 1

In regards to the Curt Q25 5th Wheel Trailer Hitch w/ R24 Slider part #C16566, there are grease zerks on the head and jaw that need lubricated as well as the skid plate and lock bar on the slider base. These will need to be lubed before each use…

view full answer...

Answer 2

We do offer slider kits for Reese hitches like the Reese Square Tube Slider for 5th Wheel Trailer Hitch #RP30048 that works with 15K, 16K, or 20K Reese 5th wheel hitches. However, unfortunately your Reese 22K Fifth Wheel Hitch #30034 is not a…

view full answer...

Answer 3

Your Road Armor pin box has an 1116 bolt pattern so the FlexAir pin boxes will not fit. The Trailair Air Ride 5th Wheel Pin Box - Lippert 1116 - 21,000lbs Item #LC155943 will though. The Air Ride pin box utilizes an air bag to reduce chucking and…

view full answer...

Answer 4

The Curt fifth wheel slider part #C16020 does fit the factory rail kit of your 2020 Ford F-350 and it weighs 170 lbs. The A25 head part #C16580 would then be a really great option and would easily tow your trailer. The head weighs 97 lbs. The A20…

view full answer...

Answer 5

We've had a similar question and Curt told us that the A25 head part #C16580 that you referenced needs the higher rated slider base part #C16570 as the bolt pattern does not match up to the lower rated slider base you mentioned.

view full answer...

Answer 6

It sounds like you have a Curt A25 and want to make it compatible with your 2020 Ram 2500 with a 6-1/2 foot bed and the factory 5th wheel puck system. We do have the parts required so you can use your Head Unit for Curt A25 5th Wheel Trailer Hitch…

view full answer...

Answer 7

The only things that you would need to reuse the Curt A25 5th Wheel Trailer Hitch part #C16046 are the Curt R24 Round Tube Slider part #C16570 and the Adapter Rails for Curt 5th Wheel Hitch w/ Slider part #C16022. I know the Adapter Rail looks very…

view full answer...

Answer 8

There are a couple of different options that you have when looking to add some clearance from your trailer to help protect your 2017 Ram 3500. If you are just using the regular Curt Q20 5th Wheel Hitch, like part #C16530-16021, then the first, and…

view full answer...

Answer 9

In regards to a Curt 5th Wheel Hitch, the weight capacity comes from the head not the base so in order to upgrade from a Curt A16 Hitch like part #C16521 to a Curt A20 or Curt A25 Slider you'd a new head, the Curt A20 Head part #C16540 or the…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Which Slider Base Fits with Curt Q25 Fifth Wheel Hitch Head

Products Referenced in This Question

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching