What Does Draw Tite Front Hitch for 2015 Jeep Wrangler Unlimited Weigh

Question

Question:

How much does part number 65069 front mounted receiver hitch weigh?

asked by: Bobby M

0

Expert Reply:

The Draw Tite front hitch part # 65069 that you referenced weighs a total of 22 lbs. I attached a picture of what it looks like installed as well as an install video for you to check out too.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The Draw-Tite Front Mount Trailer Hitch Receiver, part #65069 is a good fit for your 2008 Jeep Wrangler. I have attached a drawing that shows how the hitch is attached to the vehicle. As you can see, the attach points are on the underside of the…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The easiest way to power your electric jack off of the 7-way and/or the battery is to install the Trailer Wiring Junction Box - 7 Terminals item #3375601100 and connect your jack to the 12v circuit that your battery would also be connected to. This…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

There are a couple choices for you that will be based on the bumper you have. Blue Ox Aftermarket Bumper Adapter #BX88358 -Bumper tab thickness: 3/4", 7/8", and 1" -Pin Hole diameter: 1" Blue Ox Aftermarket Bumper Adapter #BX88357…

view full answer...

Answer 7

Yes, our Dexter leaf spring part #DX74XR is the same as the part number 072-079-00. This is a 7-leaf spring for an 8,000 lb trailer axle that is 24-7/8 inches.

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available, and…

view full answer...

Answer 10

We can definitely help set you up with a tow package for your 2024 Kia Telluride. The main components you will need are a hitch, 7-way wiring harness, and a brake controller. You will need a good ball mount too, but it sounds like you have that…

view full answer...

Answer 11

The trailer hitch options for a 2022 Hyundai Tucson are both concealed meaning the crosstube is hidden. They also both install in the same way as well with no cutting or drilling required. In regards to the Curt Trailer Hitch Receiver part #C94WR and…

view full answer...

What Does Draw Tite Front Hitch for 2015 Jeep Wrangler Unlimited Weigh

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching