Front Mount Trailer Hitch Installation - 2017 Jeep Wrangler - Draw-Tite Video

The Draw-Tite Front Mount Trailer Hitch Receiver, part #65069 is a good fit for your 2008 Jeep Wrangler. I have attached a drawing that shows how the hitch is attached to the vehicle. As you can see, the attach points are on the underside of the…

The front mount trailer hitches for a 2016 Jeep Wrangler Unlimited like the Draw-Tite Front Mount Trailer Hitch Receiver part #65069 are all designed for models with the factory front bumper. It is no possible for the manufacturer nor I to confirm…

There's no difference at all. The #HLY64FR is our unique part number for the Hollywood Racks HR1700 RV Rider bike rack, it's the same exact bike rack just by a different part number. The RV rider is a great choice for carrying heavy electric…

The flashing light normally indicates that there's not enough power available for the fridge to work. It sounds like you should have enough power present so maybe there's an issue with your converter or the wiring to it. Are all of your other…

To install the Front Hitch part #65048 on your 1997 Jeep Wrangler TJ you will use one of the holes on the bumper and then also use one of the sway bar bushing bolt holes. Check out the picture I attached for more info. I also attached a link to the…

The Curt Pin and Clip #F-4 that you referenced is designed to work on 1-1/4 inch hitches. The reason your hitch has a 1/2 inch hole and a 5/8 inch hole is because it is setup for an obsolete anti-rattle device Draw Tite J-Pin. We no longer carry the…

The second pin hole that you are seeing on the Draw-Tite Max-Frame Trailer Hitch Receiver #75600, for your 2013 BMW X5, is indeed for the use of a stabilization device. That second hole was for the Tow Ready J-Pin Stabilization Pin and Barrel Lockset…

Here's what Draw Tite says about the booster pump and the install of their Draw Tite hitch part #65069 on a 2017 Jeep Wrangler Unlimited. 2012 AND UP MODELS MAY REQUIRE TEMPORARILY MOVING THE BRAKE BOOSTER PUMP, REMOVE THE FORWARD MOST BOLT FROM…

Most versions of the 2013 Jeep Wrangler are rated to tow a maximum of 2,000 pounds. But there are a few models that have a 3,500 pound towing capacity. The models listed below have a 3,500 pound capacity. If you do not see your model then it will be…

Yes, the two can definitely be used together; the Curt RockerBall is available with a 1" diameter shank like you mentioned, which is the same diameter as the hitch ball hole of the Curt Channel Style Adjustable Ball Mount #C45901. You can use…

I produced a short video and added dimensions to a photo for you so that you could measure and be sure the CURT Multi-Ball Adjustable Ball Mount, #D900, would work on your 2005 Jeep Liberty with rear mounted spare tire. The most critical measurements…

I reached out to my contact at Curt and while I have a complete replacement option for you, the ball mount section of the #C45901 is not available separately. Since there is no other ball mount option of the same style that will fit your shank, you…