Can a 14 Inch Tire be Used on 13 Inch Rim

Question

Question:

Can i use 14inch tyre on 13 inch rim

asked by: Vicky S

0

Expert Reply:

If your trailer wheel is 13 inches you will need to use a 13 inch tire; anything larger will not fit. For a 13 inch tire, you have a couple options for size, ST175/80R13, which is 24.1 inches in diameter and 7 inches wide, and ST185/80R13, which is 24.7 inches in diameter and 7.2 inches wide.

The different sizes also mean different capacities based on load ranges. I like the Karrier tires, and recommend checking out the Karrier ST175/80R13 Radial Trailer Tire - Load Range D # AM10210, which has a load capacity of 1,650 lbs at 70 psi, or the Kenda Karrier ST185/80R13 Radial Trailer Tire - Load Range D # AM10208 which has a load capacity of 1,710 lbs at 65 psi.

I have added links to video reviews of these tires as well as a link to our entire selection of trailer tires for you to take a look at.

expert reply by: Kyle S

0

Answer 1

The Kenda Karrier ST185/80R13 Radial Trailer Tire - Load Range D #AM10208 should be inflated to its max 65 psi. On trailer tires you want to inflate the tire to the maximum cold psi, which on this tire is 65. Doing this will give you the best…

view full answer...

Answer 2

The highest ply rating tire we have for a 13 inch wheel is 8 and is the Loadstar Tire ST185/80D13 part #AM1ST79 which has a weight capacity of 1,710 lbs at 65 psi. More important than ply rating is making sure the tire has enough weight capacity for…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 4

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 5

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 6

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 9

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 10

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 11

It really just depends on what the wires are for. Most likely you have several ground wires among the 8 as well as a couple running light circuits in there as well. You just have to run all of the wires to the correct circuits. The 4-way wiring of…

view full answer...

Answer 12

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Can a 14 Inch Tire be Used on 13 Inch Rim

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching