Availability of Replacement Key for Camco Cam Lock

Question

Question:

Hi! I just need the C26261 key to replace a lost one. Do you sell the keys separate from the locks? Thank you!

asked by: Dean S

1

Helpful Expert Reply:

If you still have one of your C26261 keys then you can take it to a locksmith to have them cut you another key, otherwise you'll have to replace your entire kit with part # CAM44340 as Camco doesn't supply replacement keys for these locks. I reached out to my contact at Camco who confirmed this.

expert reply by: Jon G

1

Answer 1

Thanks for the photo and what you have there is a 1-9/16" long cam lock, so the correct Camco lock to order is the Camco Cam Lock #CAM44363.

view full answer...

Answer 2

There are several different key numbers that could be with the Camco Cam Lock #CAM44340 so the chances of you getting a common one are slim. Camco also numbers their keys differently so you wouldn't see a CH751.

view full answer...

Answer 3

The Stromberg Carlson RV Exterior Ladder part #LA-401 is an excellent exterior ladder option for motorhomes. It measures 99-1/2" tall but can trim this to fit your specific application. Please note, the standoffs will need to be attached to the…

view full answer...

Answer 4

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

view full answer...

Answer 5

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 6

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

Based on the information you gave, although I can't help with the axle (other than to state it is a 3,500 lbs axle). Dexter mobile home axles were designed for one time use and weren't really documented for replacement parts, but because you…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Availability of Replacement Key for Camco Cam Lock

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching