How To Choose Upgraded Equalizers for a KZ New Vision Sportster

Question

Question:

Could you recommend an equalizer for my trailer, and also, the trailer originally had shocks but the previous owner took them off to raise the trailer flip the axle. Will the cushioned equalizer take the place of the shocks so I dont need them anymore?

asked by: Jason R

0

Expert Reply:

In order to choose the correct replacement or upgraded equalizer for a trailer you must first measure the equalizer you have now and then compare this to the replacement/upgrade. The Equa-Flex Cushioned Equalizers are a great option and will work to reduce road shock as would a shock absorber so they would be a good substitute for this. If you can provide me with the dimensions of the equalizer or rather the distance between the two lowermost eyes then I could then help you choose the correct replacement otherwise you will need to take a look at the below options and choose the one that best matches your equalizer's dimensions.

Equa-Flex Cushioned Equalizers part # LC279687 (5-1/2" Center to Center)
Equa-Flex Cushioned Equalizers part # LC279688 (7-1/2" Center to Center)
Equa-Flex Cushioned Equalizers part # LC314336 (14-5/8" Center to Center)

Please note, the weight capacities listed for the equalizers are just guides and should not be used as exact rules for compatibility.

expert reply by: Conner L

0

Answer 1

Thanks for the pictures! Since your current equalizer is 14-5/8" long the Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 5.2K #LC314336 you were looking at will be an exact replacement. Based on the pictures it looks like…

view full answer...

Answer 2

My contact at Lippert tells me that the Road Armor cushioned equalizers for spread tandem axles aren't available, nor could they tell me when they would be. However, I do have good news for you. Lippert offers a different cushioned equalizer that…

view full answer...

Answer 3

You can definitely swap out your Dexter Axle Curved Equalizer #K13-142-02 for the Lippert Equa-Flex Cushioned Equalizers #LC314336. There is about 1-1/4" difference in height between them but that's not enough of a difference to be worried…

view full answer...

Answer 4

The height of the Equa-Flex Cushioned Equalizers part #LC314336 is 3-1/4" which you can see in the photo below. If you only have 2" of height with the existing equalizers then this may raise the trailer slightly but not a direct 1:1 ratio…

view full answer...

Answer 5

The Equa Flex Equalizers like the #LC314336 that you referenced actually come with Never Fail bushings installed in them already. Your best option would be to put the old bushings back into the equalizer as long as you didn't damage them.…

view full answer...

Answer 6

The Equa-Flex Cushioned Equalizers #LC314336 that you mentioned will still greatly improve the ride quality of your trailer even though it has more capacity than you'll need. The cushioning aspect of the equalizer will still make a noticeable…

view full answer...

Answer 7

Since your axles are only 3,000LB capacity I recommend the Equa-Flex Cushioned Equalizers #LC279687 as they are rated for 3,000-6,000lb axles. And as you said the dimensions better match your current equalizers. The Road Armor Shock Absorbing…

view full answer...

Answer 8

The Road Armor Shock Absorbing Equalizer Kit part #LC696740 are taller than most other standard equalizers so you'll likely need the longer 3-1/8" shackle straps when using them, the Lippert AP Kit part #LC52SV is a go-to for this as it has…

view full answer...

Answer 9

Between the two kits, the better option for replacing your 2-5/8" shackle straps is the version with the shorter 2-1/4" shackle straps, which is the following part number: - MORryde Suspension Upgrade Kit for Tandem Axle Trailers #MR46ZR…

view full answer...

Answer 10

Since your shackle straps are 2-1/4 inch for a wet bolt and heavy duty shackle kit you'd want the #MR46ZR which comes with bushings as well. You do not need new equalizers.

view full answer...

Answer 11

The MORryde Suspension Upgrade Kit With 2-1/4" Shackles #MR46ZR or 3-1/8" Shackles #MR76ZR will be the easiest way to get all the parts you need for your 18' car hauler trailer. These kits include all the bronze bushings, bolts, nuts…

view full answer...

Answer 12

We have one cushioned equalizer that matches the 14-5/8 inch dimension you have now with the Equa-Flex Equalizers part #LC314336 which would work great. We've tried several of the cushioned equalizers and we found that the Equa-Flex equalizers…

view full answer...

How To Choose Upgraded Equalizers for a KZ New Vision Sportster

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching