Gooseneck and 5th Wheel Trailer In-Bed Wiring Harness for a 2003 Ford F-350 Super Duty

Question

Question:

does this fit a 2003 ford f-350

asked by: Steve

0

Expert Reply:

As long as your 2003 Ford F-350 came with a factory installed 7-Way trailer connector, you can use the Gooseneck/5th wheel in-bed wiring harness # C56000.

expert reply by: Michael H

0

Answer 1

It sounds like your 1997 F-150 does not have the tow package wiring so the wiring harness #118242 will not work on your truck. To install a 7-Way trailer connector at the back of your truck, you will need to start with a working 4-Way connector,…

view full answer...

Answer 2

I believe the connector you found is the connector you will use to plug in the wiring for your 7-way connector. There should be a wiring connector along the drivers side frame rail at rear of truck between the rear wheel and the rear of truck (see…

view full answer...

Answer 3

I would be happy to recommend everything you need to convert the factory 4-way connector on your 1997 Ford F-150 to a 7-way connector. You will need the Ford Replacement OEM Tow Package Wiring Harness, 7-Way #118242 which will plug into your factory…

view full answer...

Answer 4

It looks like you are looking for a replacement trailer connector for your 1999 Ford F150 pickup truck. The Tow Ready Replacement 7-Way Wiring Harness, part #118242 is an exact replacement for the OEM harness. To install the harness you will need to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Gooseneck and 5th Wheel Trailer In-Bed Wiring Harness for a 2003 Ford F-350 Super Duty

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching