Grease and Grease Gun Recommendation for 2019 Kaufman Trailer

Question

Question:

Have 2019 Kaufman 10000 lb trailer looking for a grease gun and grease

asked by: Norman H

0

Expert Reply:

The best grease for trailer hub applications is the LMX Red like part # L11390 as it's the most heavy duty, is water proof, and is also compatible with most all other greases. Then for a gun the Grease Gun # PTW54290 which is very easy to use and well made so it will last a long time. I attached review videos for both part numbers for you to check out as well.

expert reply by: Jameson C

0

Answer 1

What you have is a slipper spring setup on your 2015 Kaufman car trailer. So what you need for a triple axle hanger kit then is the part #APTT6SE which comes with everything needed. If you need new leaf springs too you'd want the 7k rated…

view full answer...

Answer 2

The green or blue greases are usually a synthetic grease with color added for identification or brand recognition. For your application, I recommend the LubriMatic Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge #L11465…

view full answer...

Answer 3

I really like the LMX Red Grease as it is heavy duty grease which works well in high heat situations and because it is waterproof. For that the part #L11390.

view full answer...

Answer 4

I recommend the LubriMatic LMX Industrial Strength Grease #L11390 for your Dexter axle on your 2021 Vista Cruiser Travel Trailer. This grease is specifically formulated to work in extreme hot and cold temperatures under high pressures. It is also…

view full answer...

Answer 5

We recommend the Red Grease like the LMX part #L11390 as it's the heaviest duty grease available and it's also waterproof.

view full answer...

Answer 6

Standard tapered trailer wheel bearings are recommended to be re-packed with fresh bearing grease about every year or every 12,000 miles under normal use. In certain conditions this interval could be shorter, such as if you routinely tow the…

view full answer...

Answer 7

Standard tapered trailer wheel bearings are recommended to be re-packed with fresh bearing grease about every year or every 12,000 miles under normal use. In certain conditions this interval could be shorter, such as if you routinely tow the…

view full answer...

Answer 8

You will want to consult the manual for the hitch you have to determine if there is a specific type of lubricant needed and for all of the areas that need to be lubricated. I do not recommend a spray lubricant such PB Blaster for 5th wheel hitch…

view full answer...

Answer 9

I spoke with my contact at Performance Tool who said that the Heavy Duty Grease Gun #PTW54290 that you referenced is a universal fit and can be adjusted to fit any size of grease zerk.

view full answer...

Answer 10

EZ Lube axles like the item #T3584F-EZ-8974 come from the factory with just a little bit of grease in the bearings. The first time you use the EZ Lube feature to fill the axle, it will take a lot of grease. You will probably use 3/4 to a full tube…

view full answer...

Answer 11

What year Ford F-350 do you have? I can help pick out the best suspension enhancement kit if I can get that from you.

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Grease and Grease Gun Recommendation for 2019 Kaufman Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching