Can T-Taps Be Used to Install Pop & Lock Tailgate Lock on 2017 Honda Ridgeline

Question

Question:

Hi! Im very interested in this product, and your DIY videos are awesome. However a couple folks have mentioned theres no need to run the wiring all the way to the fuse box/engine compartment and can tap into the power in the A-Pillar. My question is: Is there any issue using a T-Tap to connect to the power vs. cutting and splicing? Thanks!

asked by: Mike C

0

Expert Reply:

Thank you for the kind words! You can indeed use wiring behind the B-pillar in your 2017 Honda Ridgeline when installing the Pop & Lock Custom Tailgate Lock # PAL8600 instead of having to run the wiring all the way up into the fuse box. You can absolutely use T-Taps to tie in the Pop & Lock wiring to the Ridgeline's wiring. This still accomplishes what's needed for operation, which is to tap into that circuit on the truck so the tailgate system will lock/unlock in correspondence with the factory power locks.

I have attached a short video review along with the full install manual below that you can check out as well.

expert reply by: Chris R

0

Answer 1

No, Pop & Lock does not sell the actuator component by itself. You will have to purchase The whole kit. The Pop & Lock Custom Tailgate Handle - Power Lock and Manual Lock - Black #PL8675 will mount inside the existing factory handle…

view full answer...

Answer 2

I have the perfect solution for you, Chris! The 13.5K Btu Advent Air Low Profile RV Air Conditioner for Dometic Setup with a Start Capacitor is a great replacement as it has the same output rating of your current AC unit, it has a plug to plug…

view full answer...

Answer 3

If you have the factory tow package on your 2022 Honda Ridgeline, then you will just need the Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers #RED59FR for the Redarc Tow-Pro Liberty Brake Controller #RED24FR. In order to…

view full answer...

Answer 4

Thanks for the pictures! 2" hitches do not all have a 5,000 lbs capacity. The capacity varies by vehicle. That is an old Reese 06497 hitch and the sticker is correct. It does indeed top out at 3,500 lbs. It looks like this hitch came on all of…

view full answer...

Answer 5

You will need the Pop & Lock Custom Tailgate Handle #PL8675 to add power locks to your 2019 Honda Ridgeline. The Power Lock Upgrade Kit #PL8630 you found is only an upgrade to the Kit #PL6200 which fits models without a lock already on the…

view full answer...

Answer 6

The Pop & Lock #PL6200 locking tailgate handle replaces the OEM handle and will prevent your tailgate from being opened period, whether it be swinging to the side or tilting downward. If you wanted the lock to be powered along with your doors,…

view full answer...

Answer 7

Yes, the Pop & Lock Custom Tailgate Handle #PL8675 that you referenced is compatible with the factory camera you have on your 2017 Honda Ridgeline. I attached a picture that shows the handle installed with the camera visible as well. I also…

view full answer...

Answer 8

The BAK Revolver X2 Hard Tonneau Cover part #BAK39602 is specifically designed for your 2017 Honda Ridgeline. This kit comes with 2 accessories rails that attach to the inside of the truck bed using pre-drilled holes which will then be used to attach…

view full answer...

Answer 9

Carl, since you have the factory OEM manual tailgate lock handle on the 2017 Honda Ridgeline you need Pop & Lock Custom Tailgate Handle part #PL8675 because none of the power locking systems are compatible with the manual OEM handles without…

view full answer...

Can T-Taps Be Used to Install Pop & Lock Tailgate Lock on 2017 Honda Ridgeline

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching