Will The Pop & Lock Upgrade Kit # PL8630 Fit a 2019 Honda Ridgeline With Factory Tailgate Lock

Question

Question:

I have a 2019 Honda Ridgeline that had the tailgate handle with camera replaced with the factory replacement handle with camera and manual lock. Will the 8630 upgrade power kit work with that lock or does it have to be the 6100/6200?

asked by: Ray B

1

Helpful Expert Reply:

You will need the Pop & Lock Custom Tailgate Handle # PL8675 to add power locks to your 2019 Honda Ridgeline. The Power Lock Upgrade Kit # PL8630 you found is only an upgrade to the Kit # PL6200 which fits models without a lock already on the tailgate.

expert reply by: Bud M

1

Answer 1

The Pop & Lock #PL6200 locking tailgate handle replaces the OEM handle and will prevent your tailgate from being opened period, whether it be swinging to the side or tilting downward. If you wanted the lock to be powered along with your doors,…

view full answer...

Answer 2

I spoke to my contact at Horizon Global. He said it is acceptable to mount the Bulldog Powered-Drive Kit #BD1824200100 to the slave jack itself. He also said that if you need to switch the motor wires to make it work correctly, that would be fine, as…

view full answer...

Answer 3

The Curt Front Mount Trailer Hitch #C31082 sits up really close to the bottom of the front bumper on your 2019 Honda Ridgeline, so while it will have an effect on ground clearance, it's not by much at all. We had a customer install install the…

view full answer...

Answer 4

Yes, the Pop & Lock Custom Tailgate Handle #PL8675 that you referenced is compatible with the factory camera you have on your 2017 Honda Ridgeline. I attached a picture that shows the handle installed with the camera visible as well. I also…

view full answer...

Answer 5

Though it is an unlikely scenario, you do bring up an interesting question. Should the powered Pop & Lock Custom Tailgate Lock #PAL8600 on your 2018 Honda Ridgeline fail to operate for some reason and there is no manual key to open the tailgate…

view full answer...

Answer 6

The Pop & Lock Custom Tailgate Lock #PAL8600 does not include the installation of an external manual key lock. You are correct that this product is the installation of the locking mechanism along with the wiring; when installation is complete you…

view full answer...

Answer 7

The Pop & Lock Custom Tailgate Lock part #PAL8600 which is a fit for your 2018 Honda Ridgeline will work in conjunction with the factory door locks. The way it operates will depend on which side of the vehicle (passenger/driver) that you splice…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Good question Chuck, but you won't actually have to remove the etrailer logo on the Pop & Lock Custom Tailgate Lock with Handle #PL6200. It won't come with the product, we only put that sticker on for our photos to try and prevent people…

view full answer...

Answer 10

You will need the Pop & Lock Custom Tailgate Handle #PL8675 to add power locks to your 2019 Honda Ridgeline. The Power Lock Upgrade Kit #PL8630 you found is only an upgrade to the Kit #PL6200 which fits models without a lock already on the…

view full answer...

Will The Pop & Lock Upgrade Kit # PL8630 Fit a 2019 Honda Ridgeline With Factory Tailgate Lock

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching