Lowest Profile Roof Rack for a 2016 Audi A6 Sedan

Question

Question:

Is the clamp on the Inno rack we discussed made out of metal? Is it metal on metal when it’s securely attached to the vehicle or is there some type of rubber protecting the car’s surface?

asked by: Addam

0

Expert Reply:

The lowest profile roof rack for a 2016 Audi A6 Sedan is the Inno Aero Crossbar System part # INXB100-108, part # INXS200, and part # INK412. This system sits about 3-1/2" to 4" from the roof to the top of the crossbar but it is hard to get exact measurements due to all the different roof shapes.

I have attached a photo of the Inno Aero Crossbar System installed on a different vehicle that way you can get a better feel for how tall it is.

expert reply by: Conner L

0

click to enlarge

Addam

11/1/2019

Is the clamp on the Inno rack we discussed made out of metal? Is it metal on metal when it’s securely attached to the vehicle or is there some type of rubber protecting the car’s surface?

Reply

Conner L.

11/1/2019

There are two components of the Inno Aero Crossbar System that come into contact with the vehicle, the mounting feet and the fit kit. The mounting feet are made of plastic and have a thick rubber pad underneath. The fit kit is indeed made of metal however the metal is coated with a rubberized material. Therefore, neither the mounting feet or fit kit will cause any damage to the vehicle's surface.

Reply

Answer 1

There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars #INXB100-108, Flush Feet for Aero Crossbars #INXS200, and Custom Fit Kit #INK482. This rack has a 100 lbs…

view full answer...

Answer 2

Hey Marc-Andre, Yes the EcoHitch part #306-X7365 that you referenced is a confirmed fit for your 2024 Subaru Crosstrek Wilderness.

view full answer...

Answer 3

I agree it can be a bit overwhelming looking through all of the roof racks for your 2024 Subaru Forester, but don't worry I'll help you out. The first thing you'd want to get figured out is the style of bars you're looking for.…

view full answer...

Answer 4

Crossbar spread is a key factor in determining the accessories and loads that the system can safely carry on a car. To properly measure, you will need to measure from the center of one bar to the center of the other. This is the correct way to…

view full answer...

Answer 5

Sorry to hear that, noise typically isn't a major issue with the JetStream bars #Y00425. A fairing will definitely help reduce any whistling as well as drag. Sticking with Yakima, we have the following available: -Yakima WindShield Fairing for…

view full answer...

Answer 6

You'll need an adapter, but yes, the etrailer J-Style Kayak Carrier #e98878 is compatible with the Telos XL Load Assist #MPG351XL. What you will need to add is the Universal Roof Rack Adapter Kit for Malone Telos XL Load Assist #MAL95VR. The…

view full answer...

Answer 7

The Inno Aero Crossbars #INXB100-108 with the flush feet #INXS200, with the fit kit #INK865 will need to be mounted: -15-3/4" from the gap between the front and rear doors, for the rear, &, -11-3/4" from the gap between the front and…

view full answer...