Which Brophy Camper Tie Downs Fit 2001 Toyota Tundra

Question

Question:

will these tie downs fit on a 2001 toyota tundra

asked by: Ralph

0

Expert Reply:

For tie-downs that will work in your 2001 Toyota Tundra you will want the Brophy Clamp On Camper Tie-Downs # HSSF. Brophy has told us in the past that the # HSWB was intended for domestic trucks.

These tie-downs are compatible with the turnbuckles # TDHP that you'd need to complete your camper tie down setup for your truck. This provides the connection from the tie down to the camper. I attached a review video for more info as well.

expert reply by: Jameson C

0

click to enlarge

Brian M.

1/20/2020

I have a 1998 Toyota Tacoma I don’t have the 2 inches between the rail I have an inch and 3/4 is there a bracket you recommendThank you

Reply

Jason S.

1/21/2020

For your 1998 Toyota Tacoma, I recommend the custom frame mounted tie downs # TLT2306 for the front and # TLR3500 for the rear. This is the superior option but also a custom fit for your truck so more expensive. If you want the more economical option and are okay with some drilling into the truck bed rails, then the Brophy Stake Pocket Mounted Camper Tie Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # TDSF will work for you.

Helpful Links

tv-review-brophy-stake-pocket-camper-tie-downs-tdsf.aspx

tv-review-torklift-custom-frame-mounted-camper-tie-downs-front-tlc2219.aspx

Reply

Answer 1

For your 2005 Toyota Tundra I recommend the Brophy Stake Pocket Mounted Camper Tie Downs #TDSF. These particular tie-downs will mount right to the truck's stake pockets instead of having to clamp them around the bed rails like the other…

view full answer...

Answer 2

If your 2014 Toyota Tacoma came with the Factory 7-Way then you will want to look next to the driver side kick panel for the wiring harness. I have attached a video of the Tekonsha P2 #90885 being installed on a 2012 Tacoma that you can reference.…

view full answer...

Answer 3

I have a solution for you, but HappiJac does not make a compatible tie down with your 2001 Toyota Tundra with a 6ft bed. Instead, you'll want to use the TorkLift Custom Frame Mounted Camper Tie Downs #TLT2301 (front) and #TLT3301 (rear),…

view full answer...

Answer 4

The correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2002 Toyota Tundra (Factory Hitch, Access Cab, Standard Tow Package, 6.5' Bed) is part #TLT2301 for the front and part #TLT3301 for the rear. Please note, the running boards/nerf…

view full answer...

Answer 5

Firestone Ride-Rite kit #F2245 is a fit for your 2001 Toyota Tundra TRD 4x4. I can't imagine that it would take a shop any longer than a 3 to 4 hours to perform the installation. That is about what it takes when we install them here. But what you…

view full answer...

Answer 6

The best and most secure camper tie down system that fits your 2016 Toyota Tundra 6.5 foot bed double cab is by far the Happijac system part #LC184089. This kit attaches to the truck frame instead of to the bed which provides a much stronger and more…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

You do have the option to utilize the air brakes on your 2023 Freightliner Cascadia to control electric trailer brakes using the Hayes Air Actuated Trailer Brake Controller, part #HA100400C. However, we mostly recommend just using an electric brake…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hello Dan, I can definitely help with this. It is completely normal for the Curt TriFlex brake Controller #C24VV to show the current gain setting when the brakes are applied, or when the manual override is pressed. It sounds like you have the gain…

view full answer...