Recommended Trailer Hitch and Wiring for a 2019 Subaru WRX
Question:
I want to add a trailer hitch and some wiring to my 2019 Subaru WRX. What do you recommend?
asked by: Mitch
Expert Reply:
I recommend using the Curt Trailer Hitch Receiver # C11408 along with the Curt T-Connector # C56259 because I like the way the squared Curt hitch looks on the WRX over the round Draw-Tite version. The Curt trailer hitch comes with a limited lifetime warranty and is assembled in the USA, and the T-Connector is the corresponding wiring kit for your 2019 Subaru WRX. I have attached install videos and a few pictures of this hitch installed for you to reference.
To complete a towing setup you also need the Ball Mount # C45521, Pin & Clip # F-4, and a 1-7/8" # A-80 or 2" # A-82 hitch ball. Please note that the owner's manual for your WRX states not to tow a trailer with your vehicle as it could become damaged.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- CURT
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2-1/2" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- 2-1/2 Inch Long
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- 2-1/2 Inch Span
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Video: EcoHitch Invisi Trailer Hitch Installation - 2019 Subaru WRX
- Shop: EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What Size Trailer Hitch Receiver is Available for 2015 Subaru WRX
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Availability of Trailer Hitch that Fits Both Subaru Impreza and Crosstek XV
- Q&A: Fit of EchHitch 306-X7257 Hitch on 2017 Subaru WRX With Aftermarket Exhaust
- Q&A: EcoHitch Invisi Trailer Hitch Vs. Draw-Tite Class I Sportframe For 2019 Subaru WRX STI
- Q&A: Does Curt Trailer Hitch For 2022 Subaru WRX Come Out Under the Bumper or Through Bumper Cut Out
- Q&A: Compatibility Between Thule T2 Pro XTR And EcoHitch Invisi Hitch Receiver On A 2013 Subaru Impreza
- Article: Tips on How To Tow a Trailer
- Q&A: Recommended Brake Controller and Parts Needed on a 2022 Toyota Highlander w/ 4 way Connector
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Best Bike Racks for Electric Bikes